Pedalboard accomodating a Palmer PWT 05 MK2?

[SICbass]

Hi All,

 

can anyone recommend a pedalboard that would accomodate this Palmer power supply under it? I want to keep the board as small as possible, so really don't want to give up "real esate" to the power supply.

 

Intending to put together my first pedalboard (after roughly 40 years of playing) I bought the Palmer after a colleague recommended it. The unit is great, but relatively "thick" (45mm) so it won't fit under a significant number of boards.

The spec for boards that I read, is often not specific about what clearance there is under the board, or if they are, only at the highest point. Given that the space under a board is often wedge-shaped, it remains a bit unclear.

 

Thanks for any recommendations.

[pete.young]

One option might be to increase the height under the board by putting some bigger feet on it: like this maybe https://www.diy.com/departments/diall-black-thermoplastic-vulcanizates-tpv-leg-tip-dia-32mm-pack-of-2/1725483_BQ.prd

[SICbass]

54 minutes ago, pete.young said:

One option might be to increase the height under the board by putting some bigger feet on it: like this maybe https://www.diy.com/departments/diall-black-thermoplastic-vulcanizates-tpv-leg-tip-dia-32mm-pack-of-2/1725483_BQ.prd

 

You see? That's why I love BC.

 

I honestly hadn't thought of that option - granted, I'm not the brightest. Sometimes you just need a second pair of eyes to point out what's right in front of you.

That's a great idea - thank you for suggsting it 👍 

[pete.young]

I can't take any credit for that - I'm standing on the shoulders of the giants who also post in this forum! I can't remember who suggested it or I'd credit them.