Tuner bushings for 12mm peg hole

[Telemonco]

Hi there.

 

Perhaps somebody can help me with this …
 

I got these bass tuners for my project but need the bushings. I’ve searched the web but cannot find any push-fit bushings that would work. They appear to be an odd size - 10mm shaft diameter and the peg hole is 12mm (Bronco neck). Any ideas or signposting is much appreciated. Thank you. Phil

 

[mcnach]

The way I've dealt with a tuner made for a narrower hole than what I've got was by wrapping a few turns of masking tape around the tuner bit. Just until it fits snugly. The screws will ensure it stays solid. It's been ok for quite a few years now.

[stevel]

Someone with a lathe could easily make up some bushings to fit - wouldn't take long.