Squier Classic Vibe Precision neck, generic Hi-Mass Bridge and 2 sets of Rotosound Swing Bass RS66LD strings £25 Near Bridgwater. Somerset

[Bassybert]

 

Selling this CV 60s Precision neck as I'm having a bit of a clear out and it's just sitting around.

 

Has a 41mm nut - Truss rod and tuners are working fine, it's from a 2021 model I think so has a laurel fingerboard and I've given it a coat of lemon oil.

 

The profile is really nice and playable, having a decent amount of wood in the hand but slim enough to make getting around the neck a breeze.

 

Has very minimal fret wear and I've given them a polish with some 0000 wire wool.

 

Looking for £90 posted for this

 

 

 

 

 

 

 

 

 

 

I upgraded one of my basses with a Gotoh recently and have this hi-mass bridge spare.

 

Standard 5 screw install and this one has 4 holes for string through body as an option.

 

Looking for a tenner posted.

 

 

 

 

 

 

I also have 2 sets of pretty much brand new Rotosound RS66LD Swing Bass strings. I fitted these to my basses a couple of weeks ago but just could not get on with the feel/tension so I've gone back to my trusted EB Slinky's.

 

They're both cut for a Precision/Jazz and have seen about an hour max of use on each set.

 

Looking for £25 posted for the pair or £13.50 posted for a set.

 

Any questions please let me know.

 

Edited June 8 by Bassybert
Added bass neck rather than start a new topic

[lemmywinks]

Think there was someone after a CV60 P neck a while ago due to a truss rod issue, check the Repairs section of the forum.

[lemmywinks]

Just checked and it was this one, CV70 and mapble board though.