Tech 21 XB Driver

[NancyJohnson]

3 hours ago, Tech21NYC said:

The Clean channel is totally clean. There is no amp or speaker emulation. The Drive channel can also be set clean if desired. It's best to turn the Bite off and switch the Mid control to post. Here is a picture of the pedal set so the Clean and Drive channels are both clean and relative in volume with a P-Bass. 

 

One user suggestion regarding the Bi-amp mode. It's easier to hear and understand what the high and low pass filters are doing if you turn off the level control on the opposite channel. For instance, you can dump all the low end out of the Drive channel (if desired) and still have a lot of clean bottom end when you mix in the Clean channel etc. 

 

 

Over the years, I've had so much Tech21 kit; I think where we are with this is a single box solution to a hybrid pedal set up I ran years ago (BDDI/GT2, Rolls Crossover), although the crossover back then just cut the frequencies to each stomp based on where the dial was. 

 

I'll give the muting thing a go.

 

I'm loving this a lot.