geoff90guitar Posted April 1, 2021 Posted April 1, 2021 (edited) IExcellent bass amp. (Italy) Plenty of power depth and tone. First class working order with carry case. There's no need to take it out of the case when gigging, zip up and good night lads. Welcome to trial here through my Vans or bring your own cab, observing Covid rules. Can post/ship. Geoff Ive copied some light reading from elsewhere about this model (goes on a bit): To celebrate this great honor, Marco De Virgiliis has created the Markbass Little Mark II Marco Limited Edition 08. Only 500 will be produced, and each one will be tested, approved, and signed by Marco personally. This collector's item will not last. The Markbass Little Mark II is a stunning bass amp head that combines great sound, compact size, and light weight. Its small size makes the Little Mark II easy to transport, yet with a 4-band EQ, VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter), its tone is nothing short of professional. The I/O includes an input that can handle both passive and active basses and an extra XLR balanced input for double bass pickups. Its Neutrik Speakon Combo out jacks work with 1/4" or Speakon speaker cables. A tuner out jack sends unbalanced signals to a tuner, amp, or recording equipment. Send and return effect jacks maintain your main signal even if something dies in your effects chain. FEATURES Solid state preamp analog bass head Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms 1/4" input jack works with active or passive basses Balanced XLR on front for double bass pickups Gain and Master volume controls Clip warning light EQ includes controls for Low, Mid Low, MId High, and High VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables Balanced XLR out Ground lift switch to eliminate hum Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal Effect Send and Return maintain signal even when effects fail Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections Surface-mount components are silicon-sealed to isolate vibrations Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation Integrated threaded posts for easy assembly/disassembly and added durability Rigid 2mm thick aluminium chassis SPECIFICATIONS Power Input impedance: 500Kohm, max. voltage: 15 Vpp Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp Effect Return impedance: 22Kohm, max. voltage: 25 Vpp Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm Voltage is factory preset for the U.S. Controls GAIN -80 dB to +23 dB range MASTER VOLUME GROUND LIFT: switch on rear panel Equalization LOW Center frequency: 40Hz; level ±16dB LOW MID Center frequency 360Hz, level ±16dB HIGH MID Center frequency 800Hz, level ±16dB HIGH 10kHz shelf; level ±16dB VPF (Variable Pre-shape Filter) center frequency 380Hz (cut) VLE (Vintage Loudspeaker Emulator) frequency range 250Hz-20kHz (cut) Outputs EFFECT SEND Unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT Unbalanced, max. voltage 25 Vpp LINE OUT Balanced XLR, max. voltage 10 Vpp SPEAKER OUT Speakon, 1/4" Other Dimensions: 10.87"W x 2.8"H x 10.1"D Weight: 6.39 lbs Edited April 19, 2021 by geoff90guitar Added picture 2
geoff90guitar Posted April 13, 2021 Author Posted April 13, 2021 Bump now we can see the light. Shipping now included UK mainland.
Recommended Posts