bigmuff69 Posted October 29, 2020 Share Posted October 29, 2020 (edited) Fender vintera precision in Dakota red,has a set of EMG gezzer butlers fitted and a hipshot kick donkey bridge,a couple of finds on it,nothing hideous,and strung with flats,comes with its fender gigbag,or I’ve got a spare hard case for an extra £30,can post for £20,selling because I’m waiting for a cheap £700-ish USA precision to turn up,so if anyone’s got one I’d happily trade with cash your way Fender’s Vintera range embodies everything that put the iconic guitar company on the map. Channelling the mojo of their finest ‘50s, ‘60s and ‘70s instruments, the Vintera models also boast a surprisingly affordable price point. With the ‘50s Precision Bass, it’s back to the very beginning. Body & Neck An Alder body provides the perfect blank tonal canvas, with a Gloss Polyester finish for that old-school automobile sheen. Alder is known for its balanced tone, but with a slightly pronounced upper midrange. Think of the warm, honking basslines of classic Motown records. A 1-piece Maple neck/fretboard perfectly contrasts the warm mids of the Alder with some added top-end clarity. This gives the Vintera ‘50s P Bass an emphasised attack and ensures that the bass sits nicely in any mix. The Vintage C profile, along with the Gloss Urethane neck finish, provides a clean-cut, classic playing experience. Hardware & Electronics Back to basics for the Vintera P Bass – the Vintage-Style '50s Split Single-Coil is the pickup of choice. Two simple tone/volume controls allow you to sculpt your sound out of the Alder/Maple combo. But make no mistake; this is the classic P Bass tonal palette through and through. Nickel and Chrome hardware, Knurled Flat-Top knobs and Fender’s Vintage 4-saddle P Bass bridge complete the picture. The Vintera ‘50s P Bass will take you back to the golden era of guitar making – magic. Specifications Body Body wood: Alder Body finish: Gloss Polyester Body shape: Precision Bass Neck Neck material: Maple Fingerboard radius: 7.25" (184.1 mm) Fret size: Vintage Neck finish: Gloss Urethane Neck mounting: 4 bolt Neck profile: Vintage "C" Number of frets: 20 Inlays: Black Dots Electronics Pickup: Vintage-Style '50s Split Single-Coil Precision Bass Controls: Master Volume, Master Tone Hardware Control knobs: Knurled Flat-Top Hardware finish: Nickel/Chrome Nut material: Synthetic Bone Nut width: 1.75" (44.45 mm) Pickguard: 1-Ply Gold Anodized Aluminium Truss rod: Vintage-Style Tuners: American Vintage Reverse Open-Gear Bass Edited October 29, 2020 by bigmuff69 Link to comment Share on other sites More sharing options...
bigmuff69 Posted October 29, 2020 Author Share Posted October 29, 2020 SOLD Link to comment Share on other sites More sharing options...
Recommended Posts