Fionn Posted January 9, 2019 Posted January 9, 2019 (edited) Folks. How would I go about adding a clean boost circuit to one of the channels of a basic Fender ABY pedal (like the one pictured below)? I have both an active and passive bass plugged in simultaneously. The clean boost on one of the input channels would be to bring the output of the passive bass in line with the active bass without involving an additional preamp. It’s a standard reversible ABY pedal (2 inputs to 1 output/ 1 input to 2 outputs). It’s a passive switch. The 9v supply is for the LED. Incidentally, I never use the ‘A and B’ switch to activate both channels simultaneously. I only ever use the ‘A or B’ switch to switch between one or the other, so that element of the pedal could be sacked. Your thoughts/ advice would be most appreciated. Edited January 10, 2019 by Fionn Quote
jrixn1 Posted January 10, 2019 Posted January 10, 2019 (edited) . Edited yesterday at 08:33 by jrixn1 Quote
jrixn1 Posted January 10, 2019 Posted January 10, 2019 (edited) . Edited yesterday at 08:33 by jrixn1 Quote
Fionn Posted January 10, 2019 Author Posted January 10, 2019 Thanks for that. Aye, I’m aware of those two options, but I’d prefer to mod the one I’ve got, if it’s not too much of a ball-ache Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.