Chopthebass Posted May 5, 2018 Share Posted May 5, 2018 Does anyone have a wiring diagram for a Mesa Powerhouse 4x10? I bought an empty one and cant figure out the wiring. There are two black and two white wires coming from the crossover. I totally understand series and parallel wiring, and I was expecting just two wires from the crossover. I know its a longshot, but worth a try! Thanks Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted May 5, 2018 Share Posted May 5, 2018 If it's a crossover there would be low pass and high pass outputs. If there are only two wires it's not a crossover, it's a high pass filter. Quote Link to comment Share on other sites More sharing options...
Chopthebass Posted May 6, 2018 Author Share Posted May 6, 2018 The horn is already connected by its own two wires. I did put a meter on the four wires, and the blacks are connected at the crossover and so are the whites. So I think if I connect each pair of drivers in series (16 ohm) and then connect a black/white to each pair this should work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.