ikay Posted September 13, 2015 Share Posted September 13, 2015 I'm looking for overall dimensions for an MDF humbucker (4-string, as in pic below) so I can estimate the rout needed for a project bass. If someone with an MFD equipped G&L could do a quick measure that would be much appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted September 13, 2015 Share Posted September 13, 2015 Was just going to do this, then remembered mine is a 5-string! Quote Link to comment Share on other sites More sharing options...
ikay Posted September 13, 2015 Author Share Posted September 13, 2015 Dimensions of the 5 would be useful to have as well JapanAxe, cheers Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted September 13, 2015 Share Posted September 13, 2015 OK I measured by 5-string MFD at 106.2mm x 42.3mm. String spacing between pole-pieces is about 16.5mm, and if it's the same on the 4-string that would give you 89.7mm for the larger dimension. Obviously you would have to allow some clearance in your rout. Hope this helps. Graeme Quote Link to comment Share on other sites More sharing options...
ikay Posted September 13, 2015 Author Share Posted September 13, 2015 That's great, many thanks Graeme Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.