Jump to content
Why become a member? ×

Marshall DBS7210 Head and 7041 Cab -bargain -now only £250
£395


V10Mike
 Share

Recommended Posts

Head Model DBS7210

The Marshall Dynamic Bass System was carefully designed using innovative new circuitry to provide you with a combination of superb sensitivity and excellent control plus incredible levels of dynamic power to project and respond to the full range of contemporary bass sounds. Superb sensitivity comes from the fully blendable mixture of a valve or solid state input pre-amp. The solidstate section offers fast, percussive attack, as favoured by many modern players, whilst the single ECC83 valve provides the smooth warmth and more compressed classic tone exclusive only to valve technology. Excellent control is derived from comprehensive EQ and compression facilities including primary EQ, where Low and Hi rotary tone controls combine with deep and bright switches to give amazing depth and clarity to your basic sound.

More precise tone shaping or the ability to set up a completely contrasting sound, is available from the switchable 7 band graphic EQ, which has been tailored to cut and boost those frequencies that are fundamental to dynamic bass performance. The built in compressor provides further control and features industry standard technology for smooth operation and the highest performance quality.

Knowing how important headroom and clean power are to accurate, powerful bass reproduction led our designers to engineer a system with headroom that goes far beyond the normal limits. Whereas a conventional bass amplifier has an RMS to peak power ratio of 1:2, the Marshall Dynamic Bass System dramatically increases this ratio to 1:10, giving you five times more headroom than an ordinary bass amplifier. The result is a no compromise bass system with an RMS rating of 200 watts capable of delivering peaks of 2000 watts. This ensures that the system has the energy to respond accurately to even the widest dynamic range. In sound terms this extended headroom provides incredible clarity and punch to give you the most responsive, rewarding bass amplification system that you've ever played through.

Cabinet Model 7041 4x10 with horn (400 watts RMS -8 Ohms).

The 4x10 with horn can handle a massive 400w RMS for compatibility with the 7200 or any other bass amplifier with standard quarter inch jack speaker connections For added versatility and to allow you to tune the 7041 to suit your style and sound, we have included an infinitely variable horn to boost high end frequencies. This cabinet delivers excellent full range response if used by itself or can form part of a stack system if used in conjunction with another 7041 or the perfectly matched 7015.
Dimensions: Width 606mm x Height 606mm x Depth 370mm.

Both items in excellent condition, purchased by me in June 2003 and virtually unused since. The Cab has a few small, unobtrusive repairs to the Tolex on the back and underside.

You are welcome to come and try these out in Cambridge. Very heavy, so sale will have to be cash on collection only please.

[attachment=189954:P1010755.JPG][attachment=189955:P1010756.JPG][attachment=189956:P1010757.JPG][attachment=189957:P1010758.JPG]

Edited by V10Mike
Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 4 months later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...