Sibob Posted August 19, 2008 Share Posted August 19, 2008 Hi all, I'll cut right to the chase! Can anyone draw up a wiring diagram for me!? What I'm after is a stack knob jazz layout, so vol/tone x 2 with a switch in between them that selects neck/both/bridge Thanks in advance! Si Quote Link to comment Share on other sites More sharing options...
The Burpster Posted August 19, 2008 Share Posted August 19, 2008 Nothing on the SD site? Quote Link to comment Share on other sites More sharing options...
Sibob Posted August 20, 2008 Author Share Posted August 20, 2008 (edited) No there doesn't seem to be! There's a link for diagram 'Jazz Bass Stacks', but thats referring to their 'stacks' pickups rather than stack knobs! edit: Actually, I just found this on the fender site, can anyone add in where I would put the on/on/on switch? Si Edited August 20, 2008 by Sibob Quote Link to comment Share on other sites More sharing options...
Cernael Posted August 20, 2008 Share Posted August 20, 2008 Have the wire from the neck pot to the bridge pot go from the same spot on the neck pot to one end of the switch instead. Have the wire from the bridge pickup to the output jack go from the same spot on the pot to the OTHER end of the switch. Have one last wire go from the middle lug on the switch to the output jack. Quote Link to comment Share on other sites More sharing options...
robert43 Posted August 21, 2008 Share Posted August 21, 2008 You bascially can get a wiring diag for a Les Paul / SG guitar ( I presume the switch is a 3 way ie 1 pup 2 pups 1 pup? if that you want off SD 2 humb + 3 way switch With the stacked pots you could go either tone or volume on top Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.