EA DOUBLER AND 2 X CLX CABS SOLD ELSEWHERE £850

[doghouse]

Up for grabs is my EA Rig which consists EA Doubler Amp and 2x 1-12CLX Cabs...

The head is ideal for Double Bass,

The 1st cab is the newer version with 2 speakon connectors and is mint, comes with a padded cover.

The 2nd cab is an older version with 1 speakon and 1 jack connector has few marks but nothing bad, comes with a nylon cover (not padded)

looking for £850 for the complete rig .... or...... £500 for both cabs and ill keep the head

collection is 5 mins from M1 junction 25

CLX 1X12 CAB
Configuration: Coaxial 1 x 12"

Woofer:
Custom Kevlar 12"

Tweeter:
1" High Effciency Phenolic Compression Driver

Tweeter Level Control:
located on rear connection panel

Frequency Response:
38Hz to 14kHz

Sensitivity:
103dB @ 1m

Sound Pressure Level:
128dB @ 1m

Power Handling:
350 watts (continuous unclipped power)

Impedance:
8 ohm

Connection:
One Speakon Jack and
One quarter inch Jack

Size:
19"H x 17"W x 15"D

Weight:
44 lbs (20 kg)

Handle:
One integrated custom cup handle on each side

EA DOUBLER AMP

•Inputs: Configuration: 2 independent channels, Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass- Channel 2 has XLR input with phantom power

•Input Impedance: 1Meg ohm input impedance on both inputs

•Trim controls: Independent channel level adjustments, DI output level, and high pass filter

•Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2

•Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend

•EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages (Channel 2 only) - Channel 2 also includes switchable Phantom Power, Variable Phase Control, and switchable Variable Notch Filter

•Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers

•Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4" stereo wired as TRS)

•Protection: Internal cooling fan, thermal and overload

•Line Voltage: 100/120 - 240 volts internally selected via jumper

•Frequency Response: 20Hz to 20kHz +/- 3dB

•Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms

•Size: 2.1"H x 10.5"W x 5.4"D

•Weight: 2.6 lbs

Edited October 23, 2014 by doghouse

[LukeFRC]

Good guy that doghouse too