KiOgon Posted June 3, 2013 Share Posted June 3, 2013 (edited) Do you get any noise using these when you touch the poles? 2 sets here doing the same thing! On one set I've investigated I'm getting a resistance reading between the pole pieces & the common wire, one coil is 23 Ohms, the other 16 Ohms, resistance of each coil is 5.7/5.8 K Ohms, total across output wires is 11.6 K Ohms Cheerz, John Edited June 3, 2013 by KiOgon Quote Link to comment Share on other sites More sharing options...
KiOgon Posted June 3, 2013 Author Share Posted June 3, 2013 Bumped with more info ;-) Quote Link to comment Share on other sites More sharing options...
Stacker Posted June 4, 2013 Share Posted June 4, 2013 (edited) The slugs have become part of the circuit?? (edited 'magnets'!!) Edited June 4, 2013 by Stacker Quote Link to comment Share on other sites More sharing options...
KiOgon Posted June 4, 2013 Author Share Posted June 4, 2013 [quote name='Stacker' timestamp='1370335127' post='2099150'] The slugs have become part of the circuit?? (edited 'magnets'!!) [/quote] The way I see it is 'some' of the windings must be in contact with the magnets, not normal surely? How else could I get a few Ohms (16/23) reading? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.