Jump to content
Why become a member? ×

TOA KD-3 Keyboard Amp/Mixer/PA


Recommended Posts

[color=#666666][font=verdana, arial, sans-serif][size=3]In full working order and very good cosmetic condition. As can be seen in the photos, it has been professionaly flightcased and has heavy duty handles. As you will also notice, one of the potentiomiter covers is missing but it is still usable and does not effect performance. [/size][/font][/color]

[color=#666666][font=verdana, arial, sans-serif][size=3]Selling due to downsizing my equipment. [/size][/font][/color]

[b][color=#666666][font=verdana, arial, sans-serif][size=3]Spec [/size][/font][/color][/b]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Four input channels [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• 220 watts/4-ohm, 150 watts/8-ohm power amplifier output [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Auto Comp compression circuitry w/indicator [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Power amplifier protection circuitry w/indicator [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Built-in, heavy-duty two-way loudspeaker system of 15"(38cm) woofer and constant directivity horn with piezo driver [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Built-in spring reverberation unit [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• MIDI Thru circuitry [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]Each Input Channel [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Two band EQ [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Independent effect send is post-EQ/post-fader [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Direct output on each channel, ideal for recording [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Concentric balance control and channel volume control [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• LED clip indicator for best signal to noise ratio [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Individual Input Level Selector switches [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Input Channel 1 has electronically balanced XLR microphone input connector with switchable 48 volt phantom power [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Input Channel 4 has stereo phono (RIAA) inputs for turntable with magnetic cartridge [/size][/font][/color]

[b][color=#666666][font=verdana, arial, sans-serif][size=3]Master Section [/size][/font][/color][/b]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Stereo Left and Right outputs with both RCA and 1/4" phone jacks [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Level and crossfade control for returning effects signals to stereo mixing busses [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Two band EQ for internal reverberation unit [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Headphone monitoring for Stereo L and R, SUM and EFF [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Five band graphic equalizer w/bypass switch [/size][/font][/color]
[color=#666666][font=verdana, arial, sans-serif][size=3]• Complete patch bay [/size][/font][/color]

[color=#666666][font=verdana, arial, sans-serif][size=3]£100 although I am open to offers.[/size][/font][/color]

Edited by Dorset Steve
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...