Jump to content
Why become a member? ×

jhk

⭐Supporting Member⭐
  • Posts

    645
  • Joined

  • Last visited

Everything posted by jhk

  1. [size=5][b][i]yes.................still for sale....................just seen your reply after fluffo phoned me..............[/i][/b][/size]
  2. [size=5][i][b]it`s a 1996 ...............[/b][/i][/size]
  3. [size=5][b]higher and higher .................... Jackie wilson[/b][/size]
  4. [size=5][b]This was my back up head ,but now it`s time to move it on............tech details here........ [url="http://www.eden-electronics.com/info/manuals/pdf/WT800-600-500manual2003.pdf"]http://www.eden-elec...0manual2003.pdf[/url] Manual says 300 watts per side,but you can run one cab only a@ 4 ohm off one channel........or up to 4 cabs @ 8ohms over both sides etc,etc Think of this as a WT600/WT800 but without crossover.The fan is on all the time,this was done by previous owner and it has never bothered me............collection only[/b][/size]
  5. [quote name='Ian Savage' timestamp='1367269333' post='2063592'] Officially, four ohms a side will pull 600W per channel, and it'll supply 1200W bridged into 8 ohms. It WILL go lower but will run hot and shorten the life of it. If you need more than 600W into a four-ohm cab though, you're using the wrong cabs [/quote] thank you sir......................
  6. [size=5][b][i]as far as I know it`s 8 ohms but i`ve never used that facility............................[/i][/b][/size]
  7. [size=5][b][i]2u rack stereo power amp, (proper) 600watts per side or 1200 watts bridged @ 8ohms.[/i][/b][/size] [size=5][b][i]in very good con[/i][/b][/size][size=5][b][i]dition.............. add much power to your regular bass head or bass pre-amp or use for bi-amping.... or even p.a ..............[/i][/b]goes perfectly matched with studiomaster crossover C180 (creates high and low frequencies for bi-amping) in my other ad..........[/size] [size=5][b][i]no freight,export,courier etc........... collection only[/i][/b][/size]
  8. [size=5][i][b]resurrection bump................[/b][/i][/size] [size=5][i][b]see manual for stuff that this old school baby is capable of..............[/b][/i][/size] [size=5][i][b][url="http://www.google.co.uk/#hl=en&biw=1366&bih=587&sclient=psy-ab&q=digitech+bhm+4+manual&oq=digitech+bhm+4+manual&gs_l=hp.12..0i13j0i8i13i30.20124.23228.1.25443.9.9.0.0.0.4.983.3603.4-2j0j3.5.0...0.0...1c.1.11.psy-ab.BDcp08_9EiE&pbx=1&bav=on.2,or.r_qf.&bvm=bv.45645796,d.d2k&fp=e9709e0ddbac3424"]http://www.google.co.uk/#hl=en&biw=1366&bih=587&sclient=psy-ab&q=digitech+bhm+4+manual&oq=digitech+bhm+4+manual&gs_l=hp.12..0i13j0i8i13i30.20124.23228.1.25443.9.9.0.0.0.4.983.3603.4-2j0j3.5.0...0.0...1c.1.11.psy-ab.BDcp08_9EiE&pbx=1&bav=on.2,or.r_qf.&bvm=bv.45645796,d.d2k&fp=e9709e0ddbac3424[/url][/b][/i][/size]
  9. [b][size=5]resurrection bump[/size][/b]
  10. [i][size=5]I think you might find you`ve posted a picture of a trb1005j 5 string(library photo)......[/size][/i] [i][size=5]a photo of actual bass would clarify for everyone.....[/size][/i] [i][size=5]hope this helps[/size][/i]
  11. thanks for the kind words..................... you`re right though.....this is a much underrated bass.........
  12. [quote name='icastle' timestamp='1361231150' post='1983354'] That's easy because I am an incredibly sad person. It's a 60320-C10. The hard bit is going to be finding one. I'd be more inclined to pull it out and replace it with the 'standard' IEC socket that we all know and love. [/quote] [size=5]`blimey......... thanks for that speedy ,knowledgable reply........ and yes you`re right.............. unless a second hand female inline cable (60320 C9) is knocking about,I probably won`t be able to get one.......[/size] [size=5]I`ll try fitting `kettle socket `[/size] [size=5]and see how we go......[/size] [size=5]thanks again!!!!!![/size]
  13. [size=5]can anyone identify this socket as i need to locate the female ,inline plug to fit this....... this was the same on the old yamaha PB1 bass pre amp[/size] [size=5]Marantz amp was made early 1980`s[/size]
  14. [size=5][i][b]Time to sell this on......... plays really well,very low action.........in very nice condition.........[/b][/i][/size] [size=5][i][b]no case with it though......................[/b][/i][/size] [size=5][i][b]collection only........[/b][/i][/size] [size=5][i][b]................... no freight,post,parcel etc....[/b][/i][/size] [size=5][i][b]in vivid mid mettalic blue[/b][/i][/size] [size=5][b]looking for [s]£185 [/s] now £175[/b][/size]
  15. [size=5][i]100 watt combo,1 X 15, with di out,graghic eq,compression..... comes with padded cover.........£[s]85[/s] now £75 firm........[/i][/size] [size=5][i]no freight,post etc however may be able to deliver to nailed on cash buyer.....This would be `home counties`.....eg kent,surrey,sussex,berks,middx,herts.....or between brighton and s/w london[/i][/size]
  16. [size=5][i][b]This was my back up head but now it`s time for it to move on........[/b][/i][/size] [size=5][i][b]tech details here......[/b][/i][/size] [size=5][i][b][url="http://www.eden-electronics.com/info/manuals/pdf/WT800-600-500manual2003.pdf"]http://www.eden-elec...0manual2003.pdf[/url][/b][/i][/size] [size=5][i][b]Manual says 300 watts per side,which can be run down to 4 ohms each (I suppose 5or 600 watts total is suggested!)........but you can run just one cab off one side if you want ...... or 4 cabs @ 8 ohms across the two channels etc,etc[/b][/i][/size] [size=5][i][b]Think of this as a wt800 or wt600 without a crossover .............[/b][/i][/size] [size=5][i][b]It comes with rack ears ,(not as in one of the pics),but alas ....not with any rack case.[/b][/i][/size] [size=5][i][b]Works fine.The fan is on all the time,this was done by previous owner and it never bothered me ,so I have left it as it is.[/b][/i][/size] [size=5][i][b]I don`t do freight,export etc[/b][/i][/size] [size=5][i][b]However I do get around home counties, so delivery is possible for cash buyer who knows they want it and get to make sure everythings working ok.....[/b][/i][/size] [size=5][i][b]I`m looking for [s]£325[/s] now £295[/b][/i][/size]
  17. [size=5]thanks for answers.............. shame there`s not many manufacturers doing ultra light roundwounds...............[/size] [size=5]still ..... you`ve all confirmed what I already suspected...............[/size] [size=5]regards[/size]
  18. [size=4][size=5]If you put the E to C strings from a six string set onto a five string bass and then tuned them B to G...................................... physically it would work,but..........what are the downsides/pitfalls if any ,for doing this?..........tuning problems/string tension issues?....this is for 35 inch scale..............[/size][/size] [size=4][size=5] this comes after not being able to source sensibly priced `ultra light` guage bass strings for a 5 string bass.......... ideally 35 through to 110(120 max)[/size][/size] [size=4][size=5]I`ll have my coat ready just in case this really is a stupid question.......[/size][/size] [size=4][size=5]regards[/size][/size]
  19. [size=4][i][b]you might want to put where your location is ,this will normally prompt a few potential buyers...........[/b][/i][/size] [size=4][i][b]hope this helps..................................[/b][/i][/size] [size=4][i][b]regards[/b][/i][/size]
  20. [quote name='Billy Apple' timestamp='1349723070' post='1829704'] Thanks for that. It might be nice to find someone in the Berks/Bucks region. I think there is a recommended Amp menders thread around here, I should have a look. Failing that I might have a few days away up North. [/quote] just a quick suggestion.......... bass centre tech chris does one day a week at their new location of bagshot ,which is just next to `berks`..... hope this may help.........
×
×
  • Create New...