Jump to content
Why become a member? ×

Scooby

Moderator
  • Posts

    468
  • Joined

  • Last visited

Posts posted by Scooby

  1. I have a mint condition Mesa Walkabout Scout 8ohm cab for sale. I bought this cab to combine with an Aguilar Tonehammer 500 head for small gigs. I used the cab once for a rehearsal and was so impressed with the cab that I immediately went out and bought the Walkabout Combo! This cab is amazing! It's so light to carry but produces an amazing amount of sound for its size. It's built to the usual very high Mesa standards and there isn't a mark anywhere on the cab - it's absolutely mint :D
    Details on the cab here: [url="http://www.bassdirect.co.uk/bass_guitar_specialists/Mesa_Boogie_Cabs_Scout.html"]http://www.bassdirec...Cabs_Scout.html[/url]

  2. Just thinking of selling my Aguilar Tonehammer 500 amp. Only had it a couple of weeks but an opportunity to buy a combo that I've always wanted has come along and so...
    It's in mint condition, not gigged and only used a couple of times. It comes with the Aguilar gig bag, manual etc.
    Loads of detail: [url="http://www.aguilaramp.com/products_amplifiers_TH500.htm"]http://www.aguilaram...fiers_TH500.htm[/url]

    Not a lot to say about a superb sound amp that's amazingly light yet so powerful!

  3. [quote name='gadget' timestamp='1322299080' post='1448978']
    Just to add a bit of info here... I used to have an original Saber A 5 string, but regrettably sold it! An action thats bitten me in the bum on more than one occasion!

    With regards to the 'action'. When you lower or raise the action of the string, there is an adjuster in the bridge that raises and lowers the optical pickup as well. You adjust this until the sound is its strongest. There is info on this on the lightwave website if I recall?

    As for the sound, you will get some 'fretbuzz' from the system, but its not as aggressive as on other basses. Adding in the Piezo will obviously add to this 'fretbuzz', and can give you as much buzz as you'd expect from any bass with a piezo built in. The lightwave tone is quite stunning. It gives avery strong fundamental note, and is very clear, even when set to more bassy tones, with the top end rolled back. Its a very natural sounding tone, but can have a good bit of bite in there if you want it to. Laid back is NOT a term I would use to describe, but there ius a good deal of warmth to the sound, even when made to sound more aggerssive.

    I have not played the newer models, so I cannot comment on how the VL5 compares, but in essence, it appears to be the same kind of design, with a few minor changes. I alos cannot comment as to whether (or how) any improvements or revisions to the pickups or electronics have changed things? I can only imagine they have gotten better, but it was already good to start with, so alls good!

    Hope that helps? I seem to be struggling for words today.

    Regards
    G!
    [/quote]

    Thanks, G. There is an extensive manual that goes with the bass and all the necessary tools for adjustment. The electronics are a vast improvement on earlier models and the only 'buzz' that gets picked up is from the fingers!!
    The Lightwave web site is very helpful and any emails are quickly answered. Overall, a great bass.

  4. [quote name='adledman' timestamp='1322244787' post='1448623']
    hi scooby, very intrigued by these and how it picks up the sound. does it still pick up fret buzz like a conventional system? i know this is fretless but you know what i mean. i.e can you lower the action to a stupidly low setting with out any detriment to the sound? type bump. cheers. ad
    [/quote]

    Hi Ad
    The action is already very low and you could, should you be so inclined, lower it even further. The Lightwave system is optical so only 'recognises' string movement not buzzes or rattles - see the Youtube clip I've added for more info. In fact, the Youtube clip is just a great bit of bass all round!

  5. Here's my two week old Lightwave fretless! It's a beautiful bass, with a great sound and the sustain is unbelievable - so, why am I selling? Simple, I just cannot get on with a five string fretless bass! (Will I never learn??). The details and spec are below but as it is in mint condition, has never left the house and spent it's entire, short existence in my music room then I'm asking a very reasonable
    A Youtube clip:

    Anyway, the blurb: Lightwave have been perfecting their optical pickup technology for the past 15 years. The Sabre bass is made from high grade lightweight swamp ash and is chambered for extra resonance. The top and headstock are top quality flame maple and the neck is super stable maple. The fretboard is made from resin pressure impregnated wood and is hard and resilient but gives pure and clean note definition. The overall sound is lively and natural and the option of using the piezo pickups in the bridge adds high end details and the eq allows you to dial in and out both mid range and bass. All-in-all the Lightwave sabre takes you into uncharted territory for bass tons from warm almost upright double bass to modern expressive tones. Light in weight, easy to play, fast neck and a huge array of tones make these bases so popular.

    The Saber's high performance design makes it ideal for gigging, the sonic demands of digital recording, or long hours of playing and practising. And since the LightWave Pickup does not rely on body mass for its extended bass response and long sustain, the Saber is exceptionally light in weight and designed with a natural, familiar feel. If you're considering a fretless, the Sabre Fretless delivers truer 'mwah' and 'growl' due to its LightWave Optical pickup – the ideal way to get the most fretless tone.

    Spec:[list]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][b]BODY[/b][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Body Wood - Chambered Ash with slash hole[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Top - AAA Grade Flame Maple[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Finish - Gloss Polyurethane Natural[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][b]NECK[/b][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Fretless, unlined[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Number of Frets - 24[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Scale Length - 34"[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Attachment - Bolt On (5 bolt)[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Neck Finish - Satin Polyurethane[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Neck Wood - 3-piece Rock Maple[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Fingerboard Wood - Diamondwood[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Fretboard Radius - 14"[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Neck Shape - Low-Profile 'C' Neck Carve[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Inlays - Mother of Pearl Dots[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][b]HARDWARE and ELECTRONICS[/b][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Pickups - LightWave Optical Pickup[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Bridge - Custom GraphTech Monolithic Bridges with IceTone™ Saddle[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Pre-Amp - LightWave Designed Active Pre-Amp[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Controls - Master Volume, Bass Boost and Cut, Mids Boost and Cut / Mid Sweep, IceTone™ Blend, Warm / Cool Toggle Switch[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Power - 16 Hours playing time with 1 hour recharge[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size][color=#333333]Accessories - Pro-Tec Gig Bag[/color][/size][/font][/color]
    [*]
    [color=#463C3C][font=ArialMS, Arial, sans-serif][size=3][size=3]•[/size]Weight: 7lb 7oz, 3.35kgs[/size][/font][/color]
    [/list]

  6. I have a mint custom-made padded cover for a Markbass CMD121P combo. It was made to measure by Jenart and uses a very tough padded material. There is a gap in the top of the cover for the combo handle. The measurements - just in case it might fit other combos - are W: 40cm D: 36cm H: 44cm.
    The cover has hardly been used as the combo has sat in my studio most of the time.

  7. It comes with a custom made padded cover and is in mint condition. I originally bought two Club 121 cabs recently but I'm finding I rarely need both cabs and so one is redundant. These are a great piece of kit with an adjustable tweeter and plenty of power handling capacity. On their own these cabs sound awesome but put the two together and you have a jaw-dropping sound. These cabs are retailing for around the £560 mark so, for a virtually new cab, minimal usage and a custom cover I'm looking for an extremely reasonable

    Here are the details: The Club 121 is now officially the lightest Markbass cabinet. It's killer sounding and unbeatably portable! You can lean it back in wedge monitor position to hear better onstage, and the cab's new-generation woofer and 1" compression driver and custom horn provide an impossibly full sound for such a small cab.
    [left][color=#000000][size=3]IMPEDANCE 8 ohms[/size][/color][/left]

    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]SPEAKER SIZE 1x12 in.[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]BASS PORT rear[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]TWEETER 1" compression driver with custom horn[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]POWER HANDLING 400W RMS (AES Standard)[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]CROSSOVER FREQUENCY 3.5 kHz[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]FREQUENCY RESPONSE 40 Hz to 20 kHz[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]SENSITIVITY 99 dB SPL[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]WEIGHT 27.78 lbs / 12.6 kg[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]HEIGHT 17.56 in. / 44.6 cm[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]WIDTH 17.56 in. / 44.6 cm[/size][/color][/size][/font][/color][/left]
    [left][color=#463C3C][font=ArialMS, Arial, sans-serif][size=4][color=#000000][size=3]DEPTH 16.61 in. / 42.4 cm[/size][/color][/size][/font][/color][/left]

×
×
  • Create New...