Jump to content
Why become a member? ×

Ross

Member
  • Posts

    357
  • Joined

  • Last visited

Posts posted by Ross

  1. So I haven't touched a bass in 3 years, and to be honest I only didn't sell the one I still have because I built it myself as a bitsa out of mostly used parts.

     

    I was never the most technical player at any time but played in a few bands and that. Then played less and less and life just kind of got in the way.

     

    Today, picked it up, got playing, must've spent 4 hours running through some neat lessons and exercises on YouTube, buggering about with pentatonics. Really enjoyed playing again.

     

    Looking for some good resources for getting back into it, particularly starting with decent rock lines to learn and exercises for getting my dexterity back.

    • Like 1
  2. I used ravenspirals theory guide, it's a fanastic guide for getting to grips with theory.

    [url="http://www.worldofbryan.com/rsg2mt.pdf"]http://www.worldofbryan.com/rsg2mt.pdf[/url]

    I wholly recommend it, really helps explain how music works but you needn't know how to read music or play an instrument to understand it.

    Once you've got the idea the learning curve is applying it to bass ;)

  3. Last time I shielded a bass (quite some time ago) I used the copper foil from guitar parts worldwide, lined it all and used solder between joints as belt and braces.

    But I remember that having conductive glue on it, I tested it with a multimeter to make sure.

  4. [sup]You could use high grit wet sanding to polish it up then use cutting compound (t-cut and alternatives) to bring it up to it's final finish. Just like car bodywork.

    Or get a power buffer and some cutting compound and go to town. I wouldn't attempt cutting compound alone by hand or you'll be there a long long time.[/sup]

    [sup]The fact you've managed to polish it with the wear from your fingers should mean you can polish it with friction.[/sup]

  5. Well I've been with the forums on and off for a long time, and playing bass in the same way.
    I'm finally getting back into it more than I ever have before, I wake up in the morning and I can't wait for my evening practise session.

    It was this video of RATM playing really early on in some dudes record store: [url="http://www.youtube.com/watch?feature=player_embedded&v=49WwUgdU6yE"]http://www.youtube.c...d&v=49WwUgdU6yE[/url]
    That got me back into it, started out learning Rage songs a few weeks ago and I've progressed from there onto red hot chilli peppers.
    And finally, decided to go from being a pretty much 100% pizzicato player to learning some slap.

    Anyway, it'll be good getting to know you guys and the old forums again ;)

  6. I imagine what he has done is used an ultra high adhesion primer on top of the green and then sprayed black, which is not the done thing on instruments because it's not durable enough for high traffic painting.

    You might get away with wet/ dry sanding the black off but I really doubt you're going to get it flat and you'll be forever polishing it with 2000 grit W/D paper and or tcut.
    You'll probably be better off stripping it and refinishing the lot, wouldn't use nitromors because of the new regs it's rubbish on anything like this. You could try peelaway or failing that a heat gun, then that kind of finish isn't too difficult to achieve with the the correct prep and quality paints.

  7. Don't fill it with superglue, definitely use a matchstick or similar glued in the hole. Superglue is to hard, you need to use something flexible else you pose a small risk to splitting the body, not to mention the grip won't be as tight.

    As far as soldering goes if it breaks that easy it was done by a monkey to begin with and needed redoing.

  8. Don't, whatever you do. Buy a daihatsu hijet, it's f***ing hilarious to drive because it's so crap (try doing above 50mph, or going over speed bumps, or cornering, or braking, or accelerating). It never gets old but they're really not a practical vehicle at all.

    If you can stretch to it I'd advise you to have a look at a VW caddy, bloody lovely to drive they are, awesome vans.
    Transit connect would be my choice on a budget, reliable, practical. Power is a bit lacking in some models and the seats suck though.

    You probably won't save money at the fuel pump with a van, your fiesta is going to be lighter and set up for stop start driving. A van will be thirstier.
    And be aware that LPG costs significantly more to insure than petrol/ diesel for most people.

    Have you considered a volvo estate?

  9. I'd go for the 10-20 but that just because the strings won't be horrifically cold when you go to play them.

    Guitars are pretty resillient to cold temps, it's damp you want to worry about. And sudden temp changes as has be said (no putting them by the radiator!)

  10. Just need to catch them, put a pack of crayons and a colouring book in a snare trap.
    /Awful drummer humour

    You know I'm wondering this though and I've come to the conclusion all the good drummers are taken, I play drums fine not as good as some but I've got some groove down.
    If I were to play drums then it's the dilemma of finding a good bassist. Which i would argue are even more difficult to come by. The classic "First lesson I learnt the E string, Second lesson I learned the A string and the third I skipped to play a gig" thing springs to mind.

×
×
  • Create New...