hen barn
-
Posts
433 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by hen barn
-
-
Oops wrong paste!!!
-
Hi I have a mb f1 and if have it turned up more than about 7 o clock I get distortion? I'm using mb 210 and mb 15 speakers?? And I used a status s2 classic! So I feel I'm not get enough drive power??
-
Status graphite S2-CLASSIC 5 string headless bass burl maple
iM LOOKING FOR £1000
For sale my gorgeous Burl maple top with Walnut back. Black Hardware. Included is all the paperwork and the status/hiscox liteflite case and gigbag!!! Its in excellent condition apart from a few belt marks on the back
iM BASED IN BRIGHTON SUSSEX IF YOU WANT TO COME AND TRY IT
Status spec
The S2-Classic is the ultimate combination of traditional and modern guitar design.
Woven carbon graphite and selected exotic woods are combined to create a bass
which sounds even better than it looks. It has a wide, even frequency response
with huge dynamics and sustain.
As with all Status instruments, the graphite neck is fully adjustable to allow you to set the relief in the neck to suit your playing style
The active circuit on the S2-Classic is able to provide a huge range of tones.
Master volume and pickup blend are standard, as on all Status basses, with the addition of both bass and treble, cut/boost plus a variable frequency midrange.
This midrange control works in conjunction with the 3-position switch :
In the centre position the midrange is 'flat'
With the switch down the midrange is boosted
With the switch up the midrange is cut
The central tone pot alters the frequency, somewhat like a parametric, between 300Hz and 3KHz with a fixed boost and cut of approximately 6dB
Standard specifications on S2-Classic models
Book-matched exotic facing wood with contrasting veneer laminate
3-piece back with centre walnut 'tone block'.
black hardware
Three-band EQ with variable frequency midrange control,
master volume and pickup blend controls.
A pair of Status hum-cancelling hyperactive pickups
status 301 pre-amp
Bolt-on neck : Woven graphite neck with phenolic fingerboard
.Gloss lacquer on neck, natural satin lacquer on body
Phenolic fingerboard with 24 medium jumbo frets.
Dual-action truss-rod. -
Hi sam, I've pm,d you . Steve from Brighton that brought you s2
-
but i like the 15 as i used 5 string status and need the bottom end!!!
-
hi , i have a markbass 102hf dual ported that i use with a markbass standard 151hr. i have just got a new car and cant fit both in it. So im looking at trading my 102HF Dual Ported for a 102p traveller. so will i lose anything by doing this??? am i mad??? does anyone want to do a trade???
im based in brighton -
One more day on e bay!!!!
-
One mor day left on e bay!!!!
-
price drop!!!!!!!!!!!!!!!!!!!! now only £50 plus postage
-
-
Now on e bay
-
Going on e bay tonight!!!
-
Sold, pending cash on it's way. Skb shallow 4u case now up for sale only 4 months old!!!!!
-
Hi I'm selling my nearly new skb 4u flightcase ! I got it 24/11/10 but have sold my markbass amp and effects that I had in it, so no longer needed!! . This is great to house effects! £50!! I'm based in Brighton and would like pick up but will send for £10
skb spec
SKB XRack4 Shallow "X" Rack 4U— Designed for shallower depth effects products. New 10 1/2" depth on 2, 3, and 4 space X-racks will accommodate a wider variety of effect processors, signal processors, power conditioners, bass amps.
More Details:
Designed for shallower depth effects products. New 10 1/2" depth on 2, 3, and 4 space X-racks will accommodate a wider variety of effect processors, signal processors, power conditioners, bass amps, line mixers, wireless microphones and cassette players, to name a few, without unplugging them to close the back panel. Economical, compact and stacks on all amps.
SPECIFICATIONS:
Model No. SKB-XRack4
Rackable Mount Depth: 10 3/8"
Lid Depth: 2"
Max. Int. Width: 18 3/4"
Max. Int. Height: 8 3/4"
Exterior Dimensions:
22" W
14 1/4" D
10" H
Weight: 8.3 lbs.
Rackmount Features.
The SKB line of stackable racks has received worldwide acclaim for durability, convenience and easy handling. Made of ultra high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection.
Handles: Roto-molded built-in carrying handle.
Mounting: Mounting hardware in the racks is easy with the SKB rack rail and provided hardware. -
Sorry guyS it's sold!!!!
-
Also selling markbass lm2 and rack tuner and son case now
-
im selling my gear and have for sale my MARKBASS little mark II with rack ears £325 . im based in brighton but with ship at a cost. will also sell new skb shallow case at a cost. see my other items
think this was 2008?
Recently voted "Best Bass Head" and "All-Around Best New Product" by the readers of Bass Player, our top-selling amp has made history with its stunning combination of great sound, compact size and light weight (6.4 lbs). Identical to the head included in all our CMD and mini CMD combos, this unit is truly the flagship amp for the Markbass sound. Its small size allows for easy transportation, but its sound is nothing short of professional. Also offers a bonus XLR balanced input for double bass pickups.
INPUTS
INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 22 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp
CONTROLS
GAIN
-80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
WEIGHT
6.39 lbs / 2.9 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale) -
im selling my gear and have my sansamp rackmount rbi tech 21 for sale £150 . im based in brighton but will post at a cost
the spec
The 1U rackmount SansAmp RBI is a pumped-up, expanded version of the popular SansAmp Bass Driver DI pedal.
In addition to Drive, Presence, and active Bass and Treble controls, the SansAmp RBI has a dedicated Mid control and an XLR Output Level control for optimum performance with PA systems. It also features an Effect Loop with a Mix 50/50 switch (for parallel or series operation), an XLR output with selectable levels, and a buffered direct XLR output to provide a dry signal.
Armed with a truckload of bass amp rigs in a single rackspace, you can travel as heavy or light as you like. Include access to the most coveted classic and modern bass tones, with unlimited freedom to create your own, and the SansAmp RBI is practically mandatory for any bass player.
Show up at any studio with just a SansAmp RBI and plug directly into the board for premium tones without miking. Gig with the SansAmp RBI directly through the house PA without using a separate amp. Go to a gig and run directly through the house P.A. system. Take a more "traditional" set-up to a gig with a SansAmp RBI, power amp and speaker cabinet, and run directly through the house P.A. system.
SansAmp RBI main features include:
Drive adjusts the overall amount of gain and overdrive.
Presence brings out the upper harmonic content and attack.
Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry.
Active Bass and Treble controls cut or boost ±12dB.
Dedicated Mid control, cut or boost ±12dB.
Individual Level control for the XLR out to optimize your amp's output relative to the P.A. system.
Effects Loop.
Mix 50/50 switch to configure the Effects Loop in series or parallel. 1/4" rear input and XLR output with selectable levels.
Buffered uneffected XLR output to run a dry signal to a separate channel.
Footswitch input to engage unit.
Footswitch output to chain and toggle between another SansAmp RBI.
Dimensions: 19"w x 1.5"h x 5.25"d (6.25"d overall)
Weight: 5 lbs. -
im selling my gear so have a korg rackmount tuner for sale . im based in brighton but will post at a cost. see my other items
the spec
The Korg DTR2000 is a smart choice if you're looking for a totally digital rackmounted tuner. The Korg DTR-2000 Rackmount Digital Tuner gives you completely professional tuning in a rugged rackmountable unit that's at home onstage or in the studio. The tuner displays in cents, hertz, or strobe. It features proprietary circuitry that locks right onto the root tone, ignoring harmonics that confuse cheaper tuners. 7-semitone dropped tunings, reference pitches from the sound jack, and built-in mic for acoustic guitar and instrument tuning provide a wealth of professional options. Tuning modes include chromatic, guitar (6- or 7-string), bass, and five types of open tuning. Calibration adjustable from 438-445 Hz, select either manual or auto. Lights up rack equipment mounted below.
The main features of the Korg DTR2000 include:
Chromatic, guitar (6- or 7-string), bass, and 5 types of open tuning
Locks right onto the root tone
Automatically detects the note name
Displays in cents, hertz, or strobe
438-455Hz calibration range
Reference pitches from the sound jack
12-note equal tempered
Accurate to +/- 1 cent
Lights up rack equipment mounted below
Front panel input and mute
Back panel input, output, and mute -
HI IM SELLING MY HARTKE VX115 ONLY now only £100! 15 INCH BASS SPEAKER WITH HORN. IM BASED IN BRIGHTON AND ITS PICK UP ONLY. IITS IN VERY GOOD CONDITION, WELL BUILT AND STILL LIGHT.
SPEC
The Hartke VX115 1X15” Bass Guitar Extension Speaker Cabinet, Paper Cone Speaker, and HF Horn. Warm, rounded and punchy, paper cone driver delivers a versatile tone.
The Hartke VX115 bass cabinet handles 300 Watts of power driving its 15 inch speaker, plus its horn loaded 1 inch throat compression driver. The VX 115 "Very Extreme" Series bass reflex cabinet was designed for bassists who demand excellent tone but prefer traditional paper cone drivers. The warm, punchy enclosure features a proprietary driver with a specially treated cone, impregnated fabric surround, matched convex dust cap all mounted in a heavy steel frame. The high efficiency low moving mass design allows for maximum output and plenty of headroom throughout the full range of the driver. Rounding out the tone, the cabinet has a proprietary design horn loaded high frequency transducer. Using Heavy-duty plywood construction, the rugged carpet covered cabinet has strong protective corners, ergonomic handles and a recessed jack cup protecting its two 1/4 inch inputs.
The main features of the Hartke VX115 include:
Warm, rounded and punchy, paper cone driver delivers a versatile tone
Heavy-duty plywood construction
One 15 inch proprietary driver
One horn loaded high frequency transducer
Power Handling: 300 Watts @ 8 Ohms
Ergonomic handles
Parallel 1/4 inch Inputs
d38.5cm w65cm h65cm -
I would if I found a 4x10 for sale
-
I'm still looking for 4x10
-
Hi I'm looking to download a manual for my markbass lm11 and my 102hf? I have looked on mb's site but can't find it??? Can anyone help???
-
Hi anyone thinking of down sizeing their markbass gear? I ve got a 10x 2 hf but want to upside to a 4x10hf I'm based in Brighton
Status s2 classic 5 string maple headless now SOLD!!!!!!
in Basses For Sale
Posted
ok im back from hols and ready to sell my status!!!