rwillett

This one? https://www.thingiverse.com/thing:1424380

Could be. Almost lost right eye in MTB accident so could be completely wrong.

I’m still happy to print things like battery covers. They’re small and easy. However you need to find a design on something like thingiverse. battery covers have little notches and things are very difficult to design if you don’t have the original. So if you can find a design I’ll check I can print it

Looks fabulous in mint green (?). I do like these pastel colours

Which ones you looking for?

@Dad3353 Yep know all that. I run a 3d printing business as a side line. Done a 100-150 reels in the last two years or so. The issue was that I managed to break the cardboard reel opening it. Overture use cardboard reels, Prusa use plastic reels. As I opened the sealed reel, I managed to pull the cardboard circular wheel and the whole reel fell on the floor, and the filmament unspooled. As there is no cardboard wheel in place, I put a waterbottle in the middle, placed it on a lazy susan, unbroken side down and fed the filament horizontally. The problem was that I couldn't keep the tension and gravity eventually took over. I thought it would collapse eventually, but wasn't sure when. I reckon I got 25% out before it went mad, so not too bad. I've tried despooling and respooling as I accidently brought a 3Kg reel and had to wind them onto smaller reels. I am never doing that again as its hard work. The machines do it properly, an electric drill is not the right tool at all no matter how carefully you do it. Thanks Rob

Sadly, the filmanet tangled up, fell off and got even more tangled on the floor. So I can't print. I managed one job and thats it. Sorry, no more free printing. Rob

I've made ears for my TP-Link network switch as it was shorter than 19". Did them 2 years ago, still fine. I wouldn't think ears for an IBM P-series server would work, given they weigh around 100Kg fully loaded. What I would look for would be the weight, the position of the mounting holes on the device, as that position introduces potential rotational torque, the length of the ears from the frame to the device and the weight of the device. Remember thats a lever. So if you have a device and a design, let me have a look and I'll let you know. Need to be quick though as I have other things to print now. Rob

Just made some for @alexjbassist it also depends on the load on the ears.

Absolutely no problem,

I have already downloaded the files for the Prusacaster and did work out the printing times. It's a lot, 6-7 days from memory, I thought I posted the timings up somewhere on here,but can't find it. Also the Prusa Orange in the video is about twice the price of normal PETG filament. Once the ears are printed, I may have a look again at printing this. I need a shallow neck for this though. So before I do any printing I need a shallow neck from somewhere. Rob

I do have all those colours and have seen that video. If nothing else comes along I might just print that up in black.

If you have a design, I’ll print it

Due to a major cockup from me, I managed to pull the cardboard side off a new 1Kg reel of black PETG filament. Never done that before. Bloody cardboard reels from Overture. This means I have a 1KG reel that I need to use pretty quickly. Trying to despool it and spool to a new empty reel is really difficult so thats out as an option. Tried that and it just doesn't work and tangles up. I need to print things with it or it will get tangled up and I'll just have to throw it away. So if anybody needs anything printed in black PETG and needs it in the next few days, I'll happily do it for nothing, just pay the postage. Size is fairly immaterial but the bigger the better. I hate to waste filamant, it was my last roll of black and I'll buy some more, but its annoying to throw it away. Rob

Due to a major cockup from me, I managed to pull the cardboard side off a new 1Kg reel of black PETG filament. Never done that before. Bloody cardboard reels from Overture. This means I have a 1KG reel that I need to use pretty quickly. Trying to despool it and spool to a new empty reel is really difficult so thats out as an option. Tried that and it just doesn't work and tangles up. I need to print things with it or it will get tangled up and I'll just have to throw it away. It's currently on a lazy susan on my laser printer whilst I print some ears for @alexjbassist The water bottle is full of water to weigh the reel down so as the printer pulls filament in, the lazy susan spins and the reel isn't pulled off. Not bad for 3 mins of panic even if I do say so myself. So if anybody needs anything printed in black PETG and needs it in the next few days, I'll happily do it for nothing, just pay the postage. Size is fairly immaterial but the bigger the better I hate to waste filamant, it was my last roll and I'll buy some more, but its annoying to throw it away. Rob

All ordered. Managed to buy from Thomann without adding in a guitar or indeed anything else, though sorely tempted by their Rickenbacker look-a-likes.

Rush / Closer to the Heart

Given the way my kids are behaving at the problem, I'm very happy to swap both of them for a broken Squier bass with two strings and no fretboard. Rob

@Reggaebass That's as good a reason as any. If you ever want to offload any, more than happy to help you I don't charge for my services. Rob

It's gone to a good home if that makes it any better...

This is the essential argument for art. Why is the Mona Lisa worth circa $900M? Why is a Ferrari 250GTO worth $60M? Why is Christian Ronaldo worth $200M to play in a Saudi football team? Why is a NHS nurse only worth £30K per annum? I know which is the most important to me. The classic economic theory is a scarce resource and more people wanting it (who have a lot of money) than demand to satisfy the need. I have a very small collection of old maps, I have a Booths poverty map of Greenwich, an old foldable map of London from 1829, one of Derbyshire from 1800 or so and a few others. I paid very little, even though they are scarce, other people don't seem to want them, so they are relatively cheap. Thats the same economic theory as above. Booths poverty maps have attracted a lot more attention recently and their price has gone up around 10x from what I paid. However I'm not going to be able to retire and buy and island by selling it. I paid £100 and it's worth around £1,200 now. Nice but not life changing. Rob

Nick was a great bloke to work with. Good comms and delighted to help him out with laptop.

That video is great, its a great track as well. My head is nodding and my feet are tapping. What more needs to be said. Rob

Head out south west from London to Winchester and start counting big houses, or head to Blackheath in SE London and count the houses around the common and in the Cator Estate. I lived in Greenwich for 15 or so years and coached minis rugby at Blackheath RUFC, the car park on a Sunday morning had a lot of very upmarket cars, I managed to bring the average price down with my 59 Skoda Octavia There are a lot of very, very wealthy people in London and surrounding areas. £2-£5M bonuses are not uncommon for the top. When you earn £750K + £2M bonus because you asset stripped a company, £20K for a bass is chump change.

Let me have a look at it when I get to work. If it’s simple enough I’ll do it for free. rob