-
Posts
1,460 -
Joined
-
Last visited
-
Days Won
14
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by Oldman
-
-
34” or 35”
-
I don’t have a band at the moment, not sure I’ll get one anytime soon. I put the Combo on block ‘cos it’s heavy @ 16.5 Kg. If it sells I would need something else, a Head and Cab perhaps or a lesser powered Combo. That being case I am open offers along these lines. However I don’t Need to sell, and so after some thought I’ll give a week, then withdraw it.
You’re welcome to try before you buy, but please no “Tyre Kickers” I do not have the patience for the “Hi could be interested” people🙄Thanks for l👀king.
-
-
I have packing materials, courier would be circa £25.00
-
-
https://www.trifibre.co.uk/product-category/brand/max-cases/max-general-purpose/
I bought to house a MB EVO 1 , worked well, but it’s surplus
The bottom part is 70mm deep x 400 mm wide x 280mm front to back. The top part of the case is: 45mm depth x 400mm wide x 280mm front to back. It’s a very robust case from memory it’s a MAX with an integrated handle.
-
One previous owner, unused for a number of years, it’s just to darned heavy for me my depleted state at 16.3 Kg, but sounds sublime and bags of welly.
There you have it, thanks for looking.
Top-level sounding combo designed with bass legend Alain Caron, the COMBO 121 LITE is a powerful bi-amp combo, now updated with a300W power amp for the new compression driver, and 500W power amp for the 12” speaker with maximum fidelity, headroom and dynamics! Alain Caron is known for his high standards, and the components in this combo were carefully chosen to reach those standards. This is the best-sounding bass combo ever!“INPUTS
INPUT: impedance 1 Mohm, max. voltage 10 Vpp
AUX IN: impedance 10 Kohm, max. voltage 4 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN
MASTER VOLUME
LINE OUT: GND Lift – Pre/Post EQ /Post Master (Post EQ mode)
MUTE (footswitch*)
FX LOOP BYPASS (footswitch*)
* footswitch not included
EQUALIZATION
LOW
MID LOW
MID HIGH
HIGH
VPF (Variable Pre-shape Filter) center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
PREAMP OUT: unbalanced, max. level 20 Vpp
SPEAKER OUT: speakon/1/4" combo
PHONES OUT: 1/4" 600 ohms, max. level 10Vpp
SPEAKER
1X12"
TWEETER
1" compression driver
POWER AMPS
500W (woofer)
300W (tweeter)
REFLEX
rear
OTHER
WEIGHT: 35.94 lbs / 16.3 Kg
WIDTH: 15.16 in. / 38.5 cm
DEPTH: 18.11 in. / 46 cm
HEIGHT: 23.23 in. / 59 cm
POWER REQUIREMENT: 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale.
£560.00 O.N.O
-
2
-
-
-
The perennial question 34” or 35”?
-
Bought Jacek’s Nux Bumble Bee pedalboard, I paid, he delivered, clockwork, Simple's, 5*****
-
1
-
-
-
-
-
-
OOOPS
but its a 35 inch scale
-
-
I’m downsizing, The Metro 20 is ok but too big for the pedals want to use. It has Velcro on face of it, with some underneath, I use Volto Rechargeables and have Velcro’d underneath. The hard case has no dents in it, a few tiny scrapes through intermittent use. Immaculate. I took all the Velcro off except one rail.
Thanks for looking
-
2
-
-
Stoppit
-
800 Watts you say, yes, 800, fab isn’t it .
-
35” or 36”?
-
On 26/04/2024 at 00:38, thatjazzbassguy said:
Hi,
Would you do £350 with postage?
Tks
Best keep this to PM ?
-
-
8 hours ago, Ruarl said:
Looks amazing. Are there two jacks? What’s the story there?
Also, where in the world are you?
North wales
-
SWR Workingman’s 10 Combo & Cover Reduced £195 - *WITHDRAWN*
in Amps and Cabs For Sale
Posted
What would be the weight?