Jump to content
Why become a member? ×

Philboyo

Member
 View Profile  See their activity

  • Posts

    65

  • Joined

  • Last visited

 Content Type 

Everything posted by Philboyo

  1. Philboyo
    Ladies and Gents I have two transporter cabs (checked out by Martin Bayley a famous tech chap in Bristol) and he has given them the all clear before i sell them. He said there is a slight rattle but most Hartke cabs do that at low volume anyway. I have had them for just over two years and so i guess they are around three to four years old and have had no problems. I would like £120 ono for both and pick up only in the Bristol area. I dont mind meeting up within a radius of 20 miles. You are quite welcome to bring your amp along and try them first of course They are in good condition and come with covers that do the job. I am selling them because i needed to down size and so invested in a new combo. If there is no interest by the weekend i will put them up on the infamous ebay. Specs are Single-Chamber Sealed Cabinet Design Two Hartke 10" TP Aluminum-Cone Bass Drivers Power Handling: 150 Watts @ 8 Ohms Frequency Response: 50 Hz To 4 kHz Sensitivity: 94 dB @ 1 W/1 M Voice Coil: 1.5" Magnet Weight: 40 Oz. Parallel 1/4" Input Jacks Dimensions: 14"(H) X 24"(W) X 12"(D) Weight: 36 lb. Thanks Phil
  2. Philboyo
    Hello all I have had these two transporter cabs checked out by Martin Bayley (famous tech chap in Bristol) and he has given them the all clear. He said there is a slight rattle but most Hartke cabs do that at low volume anyway. So if anyone is interested i would like £120 ovno and pick up only in the Bristol area. I dont mind meeting up somewhere but not too far. You are quite welcome to bring your amp along and try before buy. They are in good condition and comew with home made covers that do the job. Phil
  3. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  4. Philboyo
    [quote name='alexclaber' post='662393' date='Nov 23 2009, 09:26 AM']When you say 'the black cover on the driver', do you mean the dome in the middle of each cone (usually called the dustcap)? If that's loose it will vibrate against the cone and cause annoying buzzing sounds and it will also hiss/whistle/chuff as the driver goes back and forth and internal pressure causes air to rush in and out through the gap between dustcap and cone. You can usually glue dustcaps back on fairly easily but I'm not sure what kind of adhesive you'd need to bond with the aluminium and the paper and have suitable flex characteristics. Alex[/quote] Hello Alex Thanks for your reply. This dustcap appears to be secured by some black tape around the edges so i suppose i can just cut that carefully and see what is underneath yes? I have some evostick and putting a blob under the cap may do the trick. Does it matter what tape i then use to refix ? Special speaker/dustcap fixing tape? I have also contacted Hartke at Samsontech who were not much help and told me to take it to the nearest distributor for repair which happen to be KORG in Milton Keynes. Thanks again. Phil
  5. Philboyo
    Amp sold Cabs still here
  6. Philboyo
    Hello there I have two hartke tp210 cabs that recently have started to buzz/flap/blarp when playing low ends. They used to be fine being run from a hartke 3000 amp. I thought it was one driver/speaker in each cab that was faulty and so swapped them about to create one good cab and one not so good cab but much to my chagrin the results have not changed. Do i have four blown speakers? On some other web site forums it is claimed that you cant easily blow hartke speakers and that my problem is to do with a) temperature and the black cover on the driver has come loose(on all four?) I have since sold the hartke amp and am using my brand new Ashdown ABM C210T-300 EVO II Combo for testing purposes. Help please? Phil
  7. Philboyo
    [quote name='danm1989' post='654433' date='Nov 14 2009, 01:06 PM']Hi, Im interested in the amp. How old is it? Has it been gigged much? Set me up with a price as i have no idea myself what it should go for sorry. Thanks[/quote] Hello there. I think it's great that you are interested mate but i have little idea what to ask for it . really i dont. i was hoping that someone on here could help and say a reasonable price and of course we could haggle ! I have used the amp at least once a week for the past two years and bought the whole set up second hand for just under £400 from a music shop in Bristol. Now that may have been good or bad or reasonable at the time i dont know , i just thought it sounded great and was suitable for what i wanted. I have never needed to turn the thing up past half way as it was plenty loud enough. So. the amp. £100 ? is that good? anyone? Phil
  8. Philboyo
    Ladies and Gents Single-Chamber Sealed Cabinet Design Two Hartke 10" TP Aluminum-Cone Bass Drivers Power Handling: 150 Watts @ 8 Ohms Frequency Response: 50 Hz To 4 kHz Sensitivity: 94 dB @ 1 W/1 M Voice Coil: 1.5" Magnet Weight: 40 Oz. Parallel 1/4" Input Jacks Dimensions: 14"(H) X 24"(W) X 12"(D) Weight: 36 lb. I have had these two transporter cabs checked out by Martin Bayley (famous tech chap in Bristol) and he has given them the all clear. He said there is a slight rattle but most Hartke cabs do that at low volume anyway. I have had them for just over two years and so i guess they are around three to four years old. I would like £120 ovno for both and pick up only in the Bristol area. I dont mind meeting up somewhere but not too far. You are quite welcome to bring your amp along and try them first. They are in good condition and come with home made covers that do the job. Phil
  9. Philboyo
    [quote name='that's a big violin' post='500104' date='May 28 2009, 05:57 PM']Hi--does the fretboard wear or indeed the white plastic lines create any buzz of strings while playing?-some people on reviews etc. seem to say the latter can be an issue with this bass. I am interested, honest...[/quote] Hello there Nope no buzzing. What an interesting question though. I've never heard that said of this bass and always thought that a problem like that would have been caused by a warped neck or high frets but we live and learn... The fretboard ware really should not discourage anyone honestly. Thanks for your question. Phil
  10. Philboyo
    Ok then as it appears no one is interested i will put this on ebay on the weekend How disappointing that no one on here wanted it.
  11. Philboyo
    Ladies and gents This may have been asked before but... I heard an old tune the other day by a singer named Matt Monro called "We’re Gonna Change The World" and i thought what a fantastic bassline. Anyone got any details about it? Like who played it and if anyone transcribed it? Thanks Phil
  12. Philboyo
    Hello there The original asking price was £140 and to make it more attractive i dropped it by a whole £10! to £130 I just had it pointed out to me that there is one going on ebay today for £142 currently. damn! I also think that £20 is to much for postage and £15 is the correct ammount. See you Phil
  13. Philboyo
    The bass is still for sale ladies and gents. I even lowered the price...
  14. Philboyo
    Hello there Here is my Fender Squier Vintage Modified Jazz Fretless up for sale. It's a lovely guitar and the only reason i am selling it is that i have upgraded to a MIJ fretless bought recently on this forum. It's in very good condition with the only drawback being a slight dink above the controls and some fretboard ware. These in no way detract from the playablity and appearance of this fine guitar. I am looking for around £130ish There are many reviews of this bass on the internet, all of them glowing and i am sure you will not be dissapointed It will come with a gig big and can be picked up from Bristol or i can post for around £15 Cheers Phil
  15. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  16. Philboyo
    To whom it concerns... We just did a 380 miles round trip to Canterbury in the rain to buy a CIJ jazz from Chris and it's very, very nice and i am well pleased. He even threw in a load of bass magazines too. Top chap. (Hope your house move goes well Chris) Phil
  17. Philboyo
    [quote name='Beedster' post='489870' date='May 16 2009, 03:35 PM']Lucky buyer can also have about 20-30 old Bassist, Bass Guitar etc magazines And probably some other bass stuff that seems to be emerging in substantial quantities from the nooks and crannies at Beedster Towers[/quote] I'll have it please. Phil
  18. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  19. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
×
×
  • Create New...