Jump to content
Why become a member? ×

PaulHornBass

⭐Supporting Member⭐
  • Posts

    76
  • Joined

  • Last visited

Posts posted by PaulHornBass

  1. Fender FB1225 bass gig bag, used but not abused. Collection only. 

     

    Here's what Fender say:

     

    Fender's F1225 Series gig bag is the ultimate choice to keep your electric bass safe while traveling. Featuring our iconic asymmetrical instrument shape, its durable outer layer is constructed of tough 1200 Denier polyester that protects against impacts without ripping and tearing. Its interior is filled with 25mm padding lined with soft touch microfiber that keeps your instrument secure while avoiding finish damage. It even comes with two adjustable protective neck rests and exterior bumpers to minimize any strain on the instrument while in transit.The F1225 gig bag also comes with a super-padded handle and shock-absorbing EVA padded backpack straps with easily adjustable ladder lock buckles, so you can carry your instrument without physical strain.

     

    FEATURES

    1200 Denier polyester; 25mm padding with microfiber lining

    Two adjustable protective neck rests; protective exterior bumpers

    Reverse water-resistant zipper with custom ergonomic zipper pulls

    Internal/external Pin Protector strap button protection system; ID tag holder

    Shock-absorbing EVA padded backpack straps with easily adjustable ladder lock buckles

    Front storage pocket with business card window, 2 pockets for extra strings, removable padded tool pouch, 3 elastic pick pockets, 2 elastic pen loops and key fob hook

    20231115_121057.jpg

    20231115_121018.jpg

    20231115_120911.jpg

    20231115_120850.jpg

    20231115_120756.jpg

    20231115_120706.jpg

  2. 49 minutes ago, asingardenof said:

    It might just be the headphones I'm listening on but McCartney's bass just gets buried under the other instruments. Generally good but this aspect is disappointing.

    I was just going to post to comment the opposite of this. Only listened to Red album so far. Maybe it's the headphones I'm listening on!

    • Haha 1
  3. 3 hours ago, sandy_r said:

    hi Paul

    ...a couple of observations here...

     

    the clip led can be triggered from several different stages along the signal path in the preamp section; there are also a few Trim pots amongst those stages

     

    its quite possible that your gain-adjust/clip test, between your 2 amps, is not comparing like-with-like (ie it could just be a difference in setup whenever/wherever the two amps were commissioned)

     

    there is obviously an issue with the Master Volume (not ruling out a link with the relative gain setting issue) - the Vol pot could be affected by wear, dust, or influence by possible degrading (if it is an early amp) of the electrolytic capacitor feeding the signal to the pot

     

    so the best scenario is that you just have a 'dirty' Vol pot (which might be cleanable with Deoxit type spray) and the gain difference is just build/setup variation - a more serious scenario is that the Vol pot and/or electrolytic caps (possibly many) have started needing to be replaced

     

    the second scenario will need to be confirmed and repaired by a Mark bass authorised tech (preferably)

     

    you might just be able to gain enough access to the Vol pot body to apply cleaning spray to see if its a scenario 1 issue, first of all

    (the construction of the amp hardware and combo installation however makes access look to be er, 'challenging'!)

     

    hope this helps your decision-making

     

    Thanks for this - that is all quite useful to know. Hopefully then, if I can clean the dirty vol knob and resolve that issue, the gain-setting difference may be neither here nor there if the resultant output is the same. 

     

    As you say, the challenge will be accessing the vol pot body to apply the contact cleaner. I think when I last checked, the closest (possibly only??) Markbass authorised tech was in Sheffield. 

    • Like 1
  4. So, I have two Markbass Mini CMD 121p (the old versions). I keep one at home, and because I left the Midlands, where our band is based and gigs, and don't have a car, I keep the other in my bandmate's music room. The one I gig with in the Midlands has no issues - played with it last night and it was great. The one I have at home has a couple of quirks, though. There is some crackle on the volume knob, and it needs some working back and forth sometimes to get rid of a distorted signal.

     

    Something else that I've noticed is that the gain the two amps require is considerably different. Whereas my Midlands gigging amp only needs the gain set to 8 o clock with my P Bass with SD quarter pounder pickup, my home amp needs it set to nearly noon. In both cases I am setting it to just before the amp starts to clip. Can anyone suggest why this might be? I have a bass purchase lined up, but should I be thinking of getting a new amp instead? Ideally I'd like to join another band where I live (Wallasey, Wirral), and want to be set up for local gigs and rehearsals.

×
×
  • Create New...