Jump to content
Why become a member? ×

dodgnofski

⭐Supporting Member⭐
  • Posts

    958
  • Joined

  • Last visited

Posts posted by dodgnofski

  1. Hi Guys,

    When the volume control my friends Precision is full on there is no noise - but when the volume is decreased there is a buzzing sound?? - the same noise occurs when the tone control is turned up - but again is silent when fully off?? - I've tried my Precision through his rig & it's fine - so I'm presuming it is the bass & not the rig??

    HELP :) !!

  2. Wow, wow & thrice 'wow' - what a Great Guy!

    Did a deal & received delivery well 'within' 24 hours - now that's approaching a 'speed of light' deal!

    Guys, even if you don't really want what he's selling - buy it anyway - just for the experience :) !!

    Thanks Jack - bloody fab!!


    [quote name='shantijoe' post='1096180' date='Jan 20 2011, 11:27 AM']Hi Jack
    I've just discovered the feedback section so: Thanks for your warm welcome, fine collection and a happy trade. I'll be back unless I can tame my bass addiction!
    best wishes, joe[/quote]

  3. Hi Guys,

    Here is my wonderful Trace Elliot GP12 Bass Amp which has a vast array of sounds & all the power most players will ever need! In really good condition - only a few light scratches on the casing where it was in a rack - with everything working as it should & the only reason I'm selling is it just doesn't quite fit on top of my mini bass cabs - i.e. amp is 17" wide & my cabs are only 16" wide - yes I know it's splitting hairs - but that's OCD for you - which means I'm going to have to unfortunately go back to a 'mini' type amp, which is a pity as they don't seem to have the tonal range, or grunt of this baby to my albeit cloth ears :) !! - so if you have a smaller amp you would like to trade - please let me know? - an Eden WTX would be fab? - spec as follows:-

    Active & passive input selector

    280w rms / 580w peak

    Input Gain with increase,OK & overload led's to match precisely your instruments output to the input stage of the amp

    Input Blend control to vary between solid state & valve sounds - yes actually has a valve in it :) !!

    Switchable 12 Band Graphic Equaliser with level control to fine tune your sound

    Pre shape selector switch to instantly change the tone

    The highly aclaimed Trace Elliot - extremely versatile Dual Band Compressor - one of the first & few which actually works

    EQ Balance control which ALL amps should have - to instantly increase/decrease the amount of bass/treble you require according to the type of venue you are playing

    Master Volume, Effects Level control & the really handy mute switch for silent tuning & switching the amp on & off

    Trade mark Trace Elliot green backlighting - which looks fab on a darkened stage

    The rear panel has on/off switch, two 8 ohm speaker outputs, Effects send & return with switchable Full Range or High Pass facilty, Tuner output - which can also be used to link to another amp, Balanced D.I. output & a Footswitch input.

    Lot's of bang for your bucks!!

    Please feel free to contact me with any questions - I'm 'still' 5 minutes away from J15 of the M6 - someone has to be :lol: !! - so let me know if you wish to have a 'try before you buy'?

    £250 - please excuse my very poor photography - which unfortunately is on a par with my bass playing :D !!

  4. What a Great Guy :) !!

    Unbelievably helpful & knowledgeable!!

    Thanks Mike,


    [quote name='Chimike' post='1006366' date='Oct 30 2010, 02:29 PM']....

    Thanks Mark, only one word ............. SUPERB ![/quote]

  5. Hi Guys,

    Up for trade 'initially' is my built in California acoustic 470 Twin Channel Bass Amp - 170 - 'proper' watts of 70's lovliness - (none of yer mamby pamby 21st Century watts - no offence intended - before I get lynched) :) !! & allegedly 'more'?? at the reputed 2ohms it can go down to????

    I'm not very technically minded - to say the least - but I bow to anyones superior knowledge - if they can explain why this amp sounds louder than my mates 500w 'top draw' Class D amp?? - have 'they' redefined a watt during the past 35 years & I missed it during one of my frequent 'senior moments'??

    Therefore, if anyone would like a trade for an amp that is only around 40cms wide - give me a shout??

    Both channels work, but the distortion does not - no loss there then, There is the obligratory '1' graphic 'knob' missing, the 140Hz graphic doesn't seem to add a lot to the bottom end? & the middle graphic is quiet when low - which is where it sounds best anyway to me - being of the 'old school' - but there is some snap crackle & pop when pushed up?? There are a few marks/small tears in the tolex & it could probably do with a service at some point?? - apart from this, it has a fantastic tonal range which albeit to my 'old cloth ears' - few amps can match at any price & is so blinking loud!!

    Thanks Guys,

    Tim

  6. Thanks,

    Unbelievable amount of 'headroom' from such a small amp & tonally suberb!!

    Pic added.................hopefully better ones soon!


    [quote name='ukbassboy' post='1048270' date='Dec 5 2010, 02:43 PM']I cant be bothered unpacking the gig rig from my last practice so I'm playing my LMK right now. Its been 6 months since I used it last and forgot what a great little amp it is! Great tone and LOADS of volume. To practice at home I have to have both low and mid low set all the way down or it and the Big One start annoying the neighbours very quickly!
    Cracking amps![/quote]

  7. Hi Guys,

    As it would seem my next Gig will be sometime around the twelfth of never :) ........here is my Markbass LMK Twin Channel 500w Bass Amp.

    In excellent condition & complete with Markbass Footswitch!

    Not just the best amp in the Markbass range.....IMHO, - but these have to be one of the best & most versatile Bass amps in the world today.

    £475 including free next day fully insured delivery.................or collect it for £450 - I'm 'still' 5 minutes from Junction 15 of the M6 - someone has to be :) !!

  8. Thanks for that,

    I know a little bit, i.e. to check the neck stamp, pot dates & check for original soldering etc...........but please, any other tips gratefully recieved??

    Thanks again,

    Tim




    [quote name='BurritoBass' post='1044137' date='Dec 1 2010, 06:34 PM']I assume you know a bit about what you are buying? Original parts are key and if you can get the full history it's a huge bonus. I own 70s Fenders which are all original with original strings / case / till receipt and 70s Fenders which have loads of parts replaced. All are well set up and play great but obviously a huge difference in resale value[/quote]

  9. It's 'me'.......I'm Spartacus....................oops sorry......I meant Tim :lol: !!


    [quote name='Bassulike66' post='1028409' date='Nov 18 2010, 08:48 PM']Iv'e sold 3 or 4 basses and purchased just as many this year....

    Also got my Spector Euro 6LX (spalted maple,mmmmm). via a trade on here...

    and, iv'e built a nice pedal board up via buying and selling on the Effects for sale forum..

    BC rules!! :)

    Oh' and who the feck is TIM!!?? :)[/quote]

×
×
  • Create New...