Saved

[quote name='gjones' timestamp='1486589386' post='3233131']
Χαίρετε!
[/quote]

Που σε ρε πατριδα!δεν το ειχα δει πριν το μηνυμα.Ολα κομπλε;

Thank you man.i have to make a video with this bass.When i find time to go on a recording studio,i will

Here is one pic with the 40" and a normal 34"
Also one graphic comparison that made passinwind for me ( i send him audio samples).
Is the LB open.The red is the 40" and the green is the 34". Both set as flat as possible.Also the 40 is passive and the 34 active.
I will think about the build diaries.I like to share the project,but i have to be careful because i am gonna use some patented designs and i am not looking for trouble,so i am not sure if its is a good idea to publish fotos from the build or a finished bass without ID

Thank you for the welcome guys.
It took me 4 months to build it because of the limited time i had.Now i am building one longer.It was very difficult to find wenge wood with so big lengh,and again because of the limited time it will take months to finish it.It started 8 months ago the design,and i change mind in the middle.So next days i hope to build the neck and continue with the body.
Any way,here is the "Praiser"
specs are
maple/wenge/maple/wenge/maple neck
bolt on and goes inside the body till the middle of pickups
ash/maple body
ambura top
dimarzios dp 127&144
stereo out
phase switch
series/parallel switch
tone with hi-cut (push/pull) for the neck pickup

Hi,my name is Dimitris,and i am from Greece.
(trying to) play bass since 2010.
I have no favorite bassist any more,but i realy like the nice bass sound.
My gear is

basses
vig cobra select 5-string
harley benton fretless 5-string
DIY fretless 6-string 40" scale tuned C#0-F#0-B0-E1-A1-D2
DIY precision bass 40" scale tuned F#0-B0-E1-A1

amps
marshall mb150 combo
eden WTDI preamp with db technologies 1000mpa (PA amp)

cabs
fearfull 15/6

effects
fdeck HPF
ebs octabass
aphex bass xciter 1402

Hi,i am new here,so greatings to every one.
First,i have to warning you,my english are terible.
So..here we go..
I am building a 5string multiscale,and looking for pickups.
The tuning will be the classic BEADG,i am looking for passive pickups,as deep tone as possible,any shape,not to
expensive.Two options are
Seymour duncan SSB-5
EMG 40HZ
Or should i go at j-bass shape pickups?
Thank you in advance.