Jump to content
Why become a member? ×

mike.kennedy

Member
  • Posts

    90
  • Joined

  • Last visited

Posts posted by mike.kennedy

  1. Ash & me exchanging synths from either end of the M6..  maybe we should start an exclusive club... After Christmas, I understand you're an all-round good egg - thanks Ash!

  2. Bought a (fairly expensive) pedal from Andy.  Took some weeks and some reminders from me to get it together to send it after I'd paid for it.   Came good in the end, but a bit of a hassle getting there... Cheers Andy, but get your act together!

    • Like 1
  3. Behringer Tube Composer T1952 Compressor Limiter for sale - £60 posted (UK Mainland).

    The T1952 composer is 2 channel vacuum tube compressor, expander/gate, and peak limiter with ‘warmth to sound’ characteristics. 

    Features: 
    • 5 dynamic processing functions: compressor/limiter, gate/expander, peak limiter
    • Selectable “Interactive Knee” or “Hard Knee” compression modes
    • Switchable Auto function for automatic attack and release time adjustment
    • “Warmth” control allows precise dosage of desired tube effect
    • True RMS stereo link selectable
    • Switchable side chain input, monitor and high-pass filter
    • Relay-controlled hard bypass with auto-bypass function in case of power failure
    • Servo-balanced inputs and outputs on gold-plated XLR and TRS connectors for highest signal integrity
    • Shielded toroidal power transformer for ultra-low noise performance
     
     
  4. **No longer For Sale**

     

    PA System consisting of:

    • Yamaha EMX5016CF 2 x 500 watts powered mixer, with gooseneck LED, copy of manual and rugged Yamaha gig bag
    • 2 x Yamaha AX 12 speakers (600 watts @ 8 Ohms)
    • 2 x Ultimate lightweight speaker stands
    • 2 x 25 metre heavy duty cables with speakons

    This is a great little PA system that has had light use and not been out for a couple of years as surplus to requirements.  It has been well looked after and is in excellent condition.  It is absolutely ideal for pubs, clubs and small halls and the mixing desk has a lot of features that make the set-up of a decent live sound very straightforward, including feedback suppression, in-line compression and 2 built-in effects modules.  I've really enjoyed owning and using this PA, but as the type of gigs I do has changed, it is not getting used.  So reluctantly, it's up for sale.  I'm looking for £750 £650 collected from Newport, South Wales.  I can meet up at a mutually agreed location to handover the kit, but if you want the PA couriered, you will have to pay the cost of that.

    Yamaha EMX5016CF Main Features

    Full information at: http://www.yamahaproaudio.com/global/en/products/mixers/emx5016cf/index.jsp

    Yamaha AX12 Speakers:

    AX12 Series Speakers are the improved version of the popular SE Series. A trapezoidial 2-way bass reflex enclosure with a 12" bass and 1" compression driver. Features durable metal grilles, robust carpet finish, steel carry handles, Speakon and jack inputs. Maximum output 600w.

    • Trapezoidal bass reflex cabinet.
    • 1 x 1/4" phone jack, and 1 x Neutrick Speakon NL4MP.
    • 1" voice coil compression driver.
    • 12" bass.
    • 600W max output.
    • Frequency Response 60HZ-20kHz (-10dB).
    • 97dB SPL 1W@1m.
    • 35mm pole mount socket.
    • 8 ohms nominal impedance.
    • Carpet covering.
    • Metal handle.
    • Weight: 16.5 Kg
    • Size(WxHxL): 405 x 578 x 313 mm

     

  5. SOLD

    Eden D410XLT Speaker Cabinet for sale £300 collected from Newport, South Wales.  If you want to discuss options, I can transport to a mutually agreeable location.  Courier can be arranged at cost to be covered by purchaser.

    Not much to say - this is an industry standard 4 x 10" + horn speaker cab rated at 700 watts @ 4 Ohms.  Cab is in great condition and sound, but surplus to my current requirements.  This is a "made in USA" cab with standard 1/4" jack and speakon connections.  A 3rd-party set of 4 x heavy duty casters have been fitted by a previous owner.  

    20180106_161734.thumb.jpg.e7f76bf49a3f6a6117c33e4a0b25b96d.jpg20180106_161948.thumb.jpg.ca7e550485cbfb44e3aee65d3e4570bf.jpg

     

     

     

     

     

     

     

     

     

     

     

    Features:

    • Tuned and ported cabinet design
    • Aluminium horn and horn level control
    • Cast Frame Speakers
    • Neutrik and 1/4" inputs

    Specifications:

    Power Handling: 700W
    Speaker Config: 4 x 10"
    Impedance:
    Freq. Response: 50Hz - 14KHz
    Sensitivity: 106dB SPL @1W1M
    Crossover: 18dB/Octave @ 3.5KHz
    Dimensions: H: 27.5 in / 69.8 cm
    W: 23 in / 58.4 cm
    D: 18.5 in / 46.9 cm
    Weight:

    98 lbs / 44.4 kgs

  6. Now SOLD  Eden WT600 "Roadrunner" for sale - £475 Posted (UK Mainland) - open to offers...

    Basically this is 2 x WT300 power stages in one box with the familiar Eden-style pre-amp with 5 way semi-parametric eq in front.  This is a great sounding amp with enough tonal options to suit any styles and instruments.  In addition, this amp has very flexible operating possibilities as you can run this as two power amps with 4 Ohms on each side, 8 Ohms on each side or 4 on one side and 8 on the other... or you can just use one side @ 4 or 8 Ohms.  In addition you can switch to bi-amp mode and you get both amps combined @ 600 watts / 8 Ohms.

    Features: 

    • valve pre-amp
    • five-way semi-parametric EQ
    • crossover control
    • pre/post effect loops
    • stereo inputs on effects return
    • DI out
    • ground lift
    • DI level
    • pre-/post select
    • headphone out
    • tuner out
    • Enhance control
    • Switchable auto compression
    • Input pad
    • Aux inputs

    Specification:

    Power handling: 600 Watts @ 8 Ω Mono (300Wx2), Stereo 300 Watts per side into 4 Ω

    Amp modes: Stereo & Bridgeable

    Freq. Response: 10Hz - 15KHz

    Speaker connection: 1/4" Jack or Speakon

    Dims: H: 3.5 in / 8.8cm, W: 17 in / 43.1cm, D:12 in / 30.4cm

    Weight: 22 lbs

     

     

     

     

  7. Eden WTB400 Bass Amplifier Head - £225 posted (UK Mainland) - Offers? Trades considered - effects or synths but nothing too big as I need the space!

    Features:

    • Switchable automatic compression
    • Gain control
    • Distortion control
    • Enhance
    • 3 band EQ
    • DI with level control, ground lift and pre/post selection
    • Effects loop
    • Headphone out
    • Illuminated Eden logo
    • Power: 400 Watts RMS @4 Ohms
    • Peak Power: 800 Watts
    • Freq. Response: 10hz - 18khz ±2dB
    • Dimensions: 16"w x 3.5 "h x 10"d
    • Weight: 26 LBS

    This is a lovely clear sounding solid-state head with a nice adjustable distortion if a bit of dirty tone is needed. 

    What else can I say - a great responsive workhorse amp that suits many different styles of bass playing...

     

  8. SOLD

    LR Baggs Para Acoustic DI for sale in original box with manual. £150 posted to mainland UK. If you're outside this area, please enquire about postage charges.

    NB - also advertised in the Double Bass and EUB section...

    These are useful little boxes for controlled amplification of acoustic instruments. This unit has never been gigged and has only been used minimally at home.

    Acoustic Direct Box & Preamp with 5-band EQ

    Para DI Preamp
    Due to its studio quality performance, powerful tone shaping EQ and rock-solid reliability, the Para DI has become an indispensable stage tool for countless musicians around the world. This roadworthy box effortlessly tames the stage and enhances any acoustic pickup for a fuller, more complex sound. The Para DI features a 5-band EQ with a tuneable midrange and notch, variable gain control for passive or active pickups and a high-quality DI output for a pristine signal to the board.

    Features
    Adjustable gain for both passive and active pickups
    5 band EQ with tuneable notch and midrange bands
    Phase inversion for best sound and feedback control
    XLR and ¼" outputs
    Works with 9V battery or 48V phantom power

     

×
×
  • Create New...