Jump to content
Why become a member? ×

wolfmaster19

Member
 View Profile  See their activity

  • Posts

    2

  • Joined

  • Last visited

 Content Type 

Everything posted by wolfmaster19

  1. wolfmaster19
    bump
  2. wolfmaster19
    bump
  3. wolfmaster19
    Quality wood bump
  4. wolfmaster19
    Bump
  5. wolfmaster19
    Still here bump
  6. wolfmaster19
    Anyone bump
  7. wolfmaster19
    Bump
  8. wolfmaster19
    Bump
  9. wolfmaster19
    Bump
  10. wolfmaster19
    standard Fender dimentions [url="http://s18.postimg.org/p8bmqphrt/neck_Pock_Depth_Measurements.jpg"]http://s18.postimg.org/p8bmqphrt/neck_Pock_Depth_Measurements.jpg[/url]
  11. wolfmaster19
    Le Bump
  12. wolfmaster19
    Bump
  13. wolfmaster19
    Bump
  14. wolfmaster19
    Bump
  15. wolfmaster19
    [color=#222222]Hello,[/color] [color=#222222]I have some pieces and parts I was gathering for a project that I decided I will not go through with unfortunately, so here they are for your convenience:[/color] [color=#222222]1) £200 ---- "NEW" 2 piece Swamp Ash Warmoth Gecko 4 Body Unfinished with MM Sweetspot routed pickup cavity also with a blank neck poket and battery cavity on the back. (The condition of the body is New, still in the same pakage I received it, you will receive the body as if it were shipped from Warmoth, like I have ! but at lower price ! )[/color] [color=#222222]2) £80 ------ Bartolini MM pickup that was taken off a Modulus Flea Bass, it is in used condition with the usual scratches, also, the Bartolini name on the pickup is not very visible anymore. I tested it and it has that typical "growl" you would expect from a Modulus Flea ![/color] [color=#222222]3) £80 ------ Aguilar OBP-1 Preamp, in used condition, does a great job coupled with that MM pickup above.[/color] Will ship if need to at buyers expense but I'd rather somebody picked it up in Dublin[/color]
  16. wolfmaster19
    cheers fellas exactly what i needed to know i'm going to try and fit them anyway as i have already bought stainless steel inserts which could be kinda hard to break especially cause i'm gonna take small steps at a time and practice my drilling skills, i can probably use some epoxy on the thread hole to keep the inserts further in place in case it's not tight enough question is has anybody tried using a pitch taper tap for cutting a thread into the hard graphite ? i'm assuming it is possible since Moses necks can be fitted with inserts ps: where would the truss rod be standing in that void exactly?? the middle ok but is it attached to the fretboard or the back of the neck??
  17. wolfmaster19
    i'm considering a graphite neck from status for a build however i'm missing some info after looking at some photos i noticed ther's some kind of foamy material inside it, can somebody confirm it? the thing is i want to install some threaded inserts in it and want to research on the subject, do i just insert the threads as you would with wood?? or is there more to it? cheers
  18. wolfmaster19
    pmd
  19. wolfmaster19
    you sure it's 8 ohms??
  20. wolfmaster19
    pmd
  21. wolfmaster19
    Pmd
  22. wolfmaster19
    Pmd
  23. wolfmaster19
    awesome pm me
  24. wolfmaster19
    maple or rosewood board?
  25. wolfmaster19
    in perfect condition, not a single scratch or dent
×
×
  • Create New...