Jump to content
Why become a member? ×

Herbie The Rad Dorklift

Member
  • Posts

    88
  • Joined

  • Last visited

Everything posted by Herbie The Rad Dorklift

  1. I didn't realise my attached pics were so small. Here's bigger ones. [IMG]http://i65.tinypic.com/mrwv2c.jpg[/IMG] [IMG]http://i66.tinypic.com/246rl3m.jpg[/IMG] [IMG]http://i64.tinypic.com/sdgwoz.jpg[/IMG] [IMG]http://i65.tinypic.com/2e2nwyd.jpg[/IMG]
  2. [IMG]http://i64.tinypic.com/2ylqzc1.jpg[/IMG] [IMG]http://i68.tinypic.com/2drf7nm.jpg[/IMG] [IMG]http://i66.tinypic.com/d0up.jpg[/IMG]
  3. For sale is my Sandberg TM2/TM5 This was a custom order made especially for me. I've used it several times live but it is in excellent nick. I've tried to highlight the buckle rash on the back of the bass. There is a very faint "line" in the paint where the screws are but it's hard to capture on camera and purely aesthetic. It's a matte finish, alder body, maple neck and fretboard with block inlays. Bass and treble knobs, coil tap switch, master volume with push/pull (active/passive) and blend knob. Comes with a Hiscox hard case and leather strap. [b]£875[/b] collected, I can drive a bit from York or use a courier at cost.
  4. They're super. I've actually player quite a few basses, but I've only ever OWNED Sandbergs. They're just a no brainer for me.
  5. I have no idea how well they do [i]any [/i]bass.... becuase I've only played Sandberg..... *embarassed* They charge about what you'd pay at your local Sandberg dealer.....
  6. Thanks! It's absolutely immaculate and highly recommended! My new one has pearl blocks, my 1st is markerless
  7. Yeah it's got a coil tap for both pickups. My other Sandberg has a coil tap for each pick up too.
  8. Been waiting a few months for this.... It's [i]very [/i]nice.
  9. I gig mainly with a humble 12" Markbass combo. 300w solid state, turned up about half. But I've also played arenas where the back line is a 300w valve head and 8x10. Both were fine
  10. In great condition overall (the plastic bits have marks on them as its been gigged) as its been kept in its Markbass padded cover (included in sale) It's the newer version with the line out level. Pics to follow £550 collected from York
  11. At the moment I run my 300w cmd 121p at half volume, half gain. I presume id be doing the same with the head and can (300w again)
  12. "It's not actually on our list of recommended cabs for that head - but it could work for you if you were careful, but I suspect that its 400w peak handling which is pretty narrow margin of error - especially if you use EQ or effects one day or push things to 10. That cab is really designed to pair with the LMK 250 "
  13. [quote name='nottswarwick' timestamp='1344977443' post='1772009'] Be fine. Might not sound as good as some other 112 cabs but perfectly safe I would say. [/quote] Why's that? The CMD combo sounds great.
  14. This possible? OK? I've been emailing Markbass, and they say it's not recommended, but I don't know why. Yes, the Tube 500 is 500w, but only at 4ohms. I'd be running it through the New York 112 at 8ohms, therefore the amp would only be kicking out 300w (the cab can handle 400w) Is this not OK? I really don't want to get the Traveller cab. Thanks.
  15. [quote name='bremen' timestamp='1341835528' post='1724732'] That's right. [/quote] Thanks! I'll check out Radial
×
×
  • Create New...