AgentCooper Posted February 24, 2015 Share Posted February 24, 2015 While figuring out how I would remove the washer that is trapped I added 1.5mm (3 washers) from a mixed Halfords pack and crossed my fingers, gritted my teeth and used a Ratchet (knowing I risked the Headstock end). Now a lovely action without any crap card shim, 0.3mm relief and just fret 19 is a highspot to sort ... Do not try this at home (with anything expensive especially) ! Quote Link to comment Share on other sites More sharing options...
Manwithvan Posted October 15, 2015 Share Posted October 15, 2015 [quote name='paul_5' timestamp='1380804269' post='2230786'] I, erm, fashined them out of some old nuts that had the right inside diameter. I held them in a pair of pliers and filed the corners off. By hand. Worked a treat. [/quote] I found an old nut with slightly smaller diameter and filed away the inner thread. By hand. Also worked a treat. Total repair time about 20 minutes. Total time in pre-op indecision mode - about five weeks. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.