jim_bass Posted February 28, 2010 Share Posted February 28, 2010 Can I run my Ashdown Klystron 500 amp head without a cab or will it damage the amp? I was just wondering if I could use the DI and effects that are built into the head to record into logic via my usb audio interface without annoying the lady in the flat below me! I don't know if the output level of the DI is dependent of the main output volume level of the amp? Would it need to be turned up to get a a suitable level through the DI? Quote Link to comment Share on other sites More sharing options...
MythSte Posted February 28, 2010 Share Posted February 28, 2010 Solid state power section. Should be fine! I'd check the manual first though, just in case. Generally speaking its only amps with a valve power section that aren't happy without a load. Quote Link to comment Share on other sites More sharing options...
Protium Posted February 28, 2010 Share Posted February 28, 2010 My ABM runs fine with no load, just set the output volume to zero. The DI level is controlled by the input volume and EQ IIRC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.