mojobass Posted November 18, 2009 Share Posted November 18, 2009 Righht thought i'd swap out the pups on my CV jazz and put in the vintage style EMG;s ive got lying about! Also, Ive got a EMG balance pot lyin around too so thought i'd use it instead of two volumes! The controls i have are a pre wired vol and tone pot from a PBass EMG setup, but can anyone help withhow i wire the balance pot up to it and also the output jack? cheers Quote Link to comment Share on other sites More sharing options...
mrcrow Posted November 18, 2009 Share Posted November 18, 2009 [quote name='mojobass' post='658250' date='Nov 18 2009, 04:02 PM']Righht thought i'd swap out the pups on my CV jazz and put in the vintage style EMG;s ive got lying about! Also, Ive got a EMG balance pot lyin around too so thought i'd use it instead of two volumes! The controls i have are a pre wired vol and tone pot from a PBass EMG setup, but can anyone help withhow i wire the balance pot up to it and also the output jack? cheers[/quote] [url="http://www.stewmac.com/freeinfo/Electronics/Pots/i-4137.html"]this should show you the way[/url] you will need to disconnect the P from its vol and connect it to the pan pot..likewise the jazz pup keep the tone and jack wired together and all you need do is connect from the pan pot outlet to the tone pot in effect you are interposing the pan in the present P wiring and then connecting the jazz to the pan pot you dont need any more gear..maybe a bit of wire as you have 2 pups pan pot vol pot tone pot jack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.