Alun Posted September 5, 2009 Share Posted September 5, 2009 Hi folks. As much as I love the tone of my Cort Curbow, I never use the "slap switch" so am toying with the idea of converting it to a passive switch should the battery die mid gig. I've located a wiring diagram [url="http://www.cortguitars.com/download.asp?path=/DataBank/support/schematics/2006/CURBOW4_4FL_52.pdf&filename=Curbow5.pdf"]HERE[/url] but am stuck on a couple of points.... - I though the Bartolini Mk1 was a passive pickup but there appears to be a wire going to the battery from it. Any ideas on how I could test this short of rewiring the pickup direct to the jack socket ( ie bypassing the preamp) and taking the battery out? - any thoughts on how to wire up the toggle ( and what to do with the wires currently going to it)? Any help greatly appreciated. I'm happy enough with soldering but not sure where to start on this one Cheers Alun Quote Link to comment Share on other sites More sharing options...
7string Posted September 6, 2009 Share Posted September 6, 2009 There's a couple of different versions of the Mk1, but I've read [url="http://www.talkbass.com/forum/showthread.php?t=77908"]here[/url] that the Curbow one is an active pickup. This means you'll have to have a battery to make it work, with or without a preamp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.