Faulty Katana GO Headphone Amp???

[Useless Eustace]

I just bought a Katana GO Headphone jack from Amazon.  Using it for the first time today.

 

I connected a cheap old pair of Earbuds.  The sound was horrible, peaking & cutting out.   I thought they clearly can’t take Bass.    So I tried a pair of Sennheiser HD570 Headphones.   The volume is significantly lower (bit too low), like the GO is struggling to drive them and again, signs of crackling & cutting out.

 

So I connected the Bass to my Roland Cube20 & tried both Earphones.   Both loud & clear!   No comparison.

 

I’ve noticed the screen on the GO is blank with a dot moving round the edge.   Is that how it should be?

 

I absolutely love the idea of this thing.   Silent practice while streaming music & video lessons, I wish I’d had this 20 years ago!!!    But if I can’t sort this sound, it will have to go back ☹️

 

 

Thanks

[ped]

Check the amplifier settings in the settings. You have output levels there which influence the master volume. I leave my master volume on max and use the amp output setting on my clean patch to get the right level. 

 

Same goes for compressor and effects.

[Useless Eustace]

50 minutes ago, ped said:

Check the amplifier settings in the settings. You have output levels there which influence the master volume. I leave my master volume on max and use the amp output setting on my clean patch to get the right level. 

 

Same goes for compressor and effects.

Thanks ped 

 

I’ll be honest, I struggle with tech.

 

I don’t know how to get into settings.   There’s just a quick start card in the box, which is about the limit of my instructions reading ability.

 

Do I have to download an App?

 

[ped]

Yes there's an app. Once you fire it up you can access the patch settings and levels. It sounds strange that it should be crackling and cutting out, though. Check there's no debris in the headphone jack. It might be damaged, because it definitely shouldn't do that, volume issues aside. Also, I'm pretty sure the display function you describe is normal until you change something in the settings. After a while it'll revert back to the circular pattern presumably to save battery.