(Belated) NCD and home-made plinth/riser.

[Lfalex v1.1]

 

Phil Jones Bass C8 atop its new home.

 

Plinth was made from 2x 400mm² paving slabs, 2 carpet tiles and an old 6mm thick exercise mat. The cargo strap runs under the bottom slab, but above the slice of exercise mat. Holds it all very firmly in place so no errant relatives dislodge anything. 

The strap unfastens in 2 seconds and the cab can be removed for rehearsal/gigging.

 

The plinth elevates the cab by ~70mm. I doubt that changes anything for boundary reinforcement, but it's all very rigid and stable in a way it wasn't before, plus there's a small degree of mechanical decoupling from the floor. 

 

In any case, it certainly sounds good.