PRICE DROP Wayne Jones Bass Preamp + Powered 1x10 cab - *SOLD* £700 Pocklington nr York

[johnbiffa]

HUGE PRICE DROP FOR QUICK SALE £575
 

I am predominantly using IEM and FoH in my Steely Dan tribute band and this incredible rig is not seeing any use, I have 2 cabs and price Inc Preamp (boxed) and 1 cab, needs to be collection or meet up or buyer organises courier.

 

Review by SBL

 

WJBP Bass Guitar Pre-Amp DI

Notes from Wayne Jones: My perfect sound was an Avalon 737 studio pre through my WJ powered cabs. So I set out to design a bass pre-amp that truly reproduced your bass sound & thus enabled you to tailor your sound. Also the tone controls had to work in the right areas & the pre had to have all the bells & whistles we need to do our job. Again no expense spared, just the highest quality components I could get for everything we need on stage & in the studio. These were my Instructions to my Engineer.

I have achieved that with the WJBP

This pre will also make front of house engineers happy as what goes in comes out.

The WJBP is designed with a no compromise attitude in Cost, Quality, Components & Features just as are WJ High End High Powered Bass Cabinets.

Features

Input 1/4” phono stereo/mono jack

Input Gain For both Passive & Active basses

-10 Db pad

Input Gain clip Indicator LEDS (top left corner)

Tone controls are critically set by Wayne & are extremely accurate in the attack points of each string. You can set them by one for each string on your bass All +15Db -20 Db

Incredible separation between the tone controls

There is also a 30 Hz boost for those that may like it ( not really needed at all as the Bass control gives such a great bottom end with ultimate attack). In/out button for selection

Compressor: Optical, automatically senses & is very effective even with a very small amount engaged. In/out button for selection

Balance: This is a balance control for stereo operation e.g. 2 WJ 2x10 or Stereo WJ 1x10 Powered cabs.

Master volume Controls output

Pre-Amp Output Indicator LEDS (top right corner) tell you if you are overloading the WJBP output

Mute - Puts the WJBP in standby mode. LED Indicates when in use. The Mute mode should also be used for power up of the WJ Powered cabs, otherwise a very loud 1000watts will sound when WJ Powered cab (or separate power amp) is turned on.

It also operates the built in Tuner. For standard tuning for 4, 5 & 6 string basses

Foot switch mutes all output for silent tuning.

 

Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs.

Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower)

All master outs can be used together as a pair or Individually with balance control set to the respective output

FX Send & Return - Stereo or mono

Foot switch - Mutes all output 

DI Output - Balanced XLR out with Level control & ore or post EQ button 

Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with.

Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp.

Rack Mount Ears - Included

Specifications

Input 1/4” Active Unbalanced
Impedance 220K
Max Level +20dBu

Outputs
Balanced XLR
Impedance 300 Ohm
Max Level +27dB
1/4” TRS Unbalanced
Max Level +22dB
Frequency Response 10 hZ to 20 KHZ
THD+Noise@1KHz 2.5 %
Signal to noise ratio >80dB Limit 2
Total Gain 62dB
Universal Line Voltage 115/240 VAC, 50/60Hz

Shipping size
40.5 cm x 32.5 cm x 18 cm
Weight 5.9kg

Rear Panel
Inputs 1/4” & 3.5mm TRS Active Stereo

Impedance 20K
Max Level +15 dBu

EQ Band frequencies:
Band 1 20-300Hz, Centre set at 80Hz
Band 2 60-1KHz, Centre set at 160 Hz
Band 3 150-2.5KHz, Centre set at 500Hz
Band 4 450-8KHz, Centre set at 1.6KHz
Band 5 1KHz-20KHz Centre set at 5KHz
Band 6 Centre set at 10KHz

Size 6.6 cm x 30 cm x 24 cm (including knobs)
Weight 2.41kg

 

 

Cab

 

The WJ 1×10’s

Are Extremely light weight (no more back trouble) great for small rooms. 500 Watt a side, 4 ohm cabinets that are used as a pair in stereo or parallel mono.

 

These will blow you away. Ideal for smaller gigs.

They are so light but sound so full & clear, 40 Hz- 20 KHz
You can also use the powered one by itself as a 500 Watt cabinet. It will only use one side of the power amp which operates totally separate from the other.
Besides all that you can pop them up on stands & use them for monitors in your home studio.

Digital Dsp For Powered Bass Cabinets

Wayne Jones Audio powered bass cabinets now feature DSP input and crossover.

The DSP technology used has been developed with our award winning range of Wayne Jones Audio Studio Monitors in conjunction with SoundID Reference from Sonarworks.

Cabinet Specs: For a pair

Power - 1000 watts. 500 Watts per side into 4 Ohms per side

Power Amp - D Class switch mode stereo power amp with heat sink plate mounted into the rear of one cabinet.

Power Amp frequency - 20 Hz – 20 KHz

High Pass Filter – 30Hz roll off

Cabinet tuning – 40 Hz to 20KHz (speakers will reproduce below 30Hz so thus the need for the HPF)

Drivers - 2 custom made Wayne Jones 10” drivers with Aluminium cast frames, specially formulated cone pulp, Kevlar impregnated cones.

Voice coil – 3”

Magnet – Massive Ferrite

Tweeter -  JBL, 1.75” Voice coil

Crossover point – 3.5KHz

Control plate – Brushed Stainless Steel

Mains Power in- IEC

2 XLR balanced Inputs with parallel mono (link) or stereo selection switch.

LED readout for thermal & amp; clip Indication.

Attenuators

High -12Db cut

Mid attenuator -12Db cut @ 300Hz to 600 Hz range

Dimensions

Height: 47cm Width: 35cm Depth: 52cm

Weight

Active   18.2kg

Passive

Edited 22 hours ago by johnbiffa
Video and PRICE DROP added also title amended

[johnbiffa]

Possibly interested in Barefaced cabs or Fender Bassman (silver face) rigs in trade

Edited January 3 by johnbiffa

[Paddy777]

Id possibly be interested in buying the Cab without the preamp?

[johnbiffa]

Happy to split if that works for you 

Edited January 13 by johnbiffa

[johnbiffa]

All PM's replied