Jump to content
Why become a member? ×

Sadowsky SBP-1 Bass Preamp / DI PENDING - *SOLD*
£86
Llanfyllin SY22


Recommended Posts

Posted (edited)

Excellent condition used pedal, with original packaging,  with instruction leaflets in English and German as supplied. Has very small ding in the paint on front left of pedal from the aluminium trim on my board flight case, otherwise pretty much like new, and has the original rubber feet on the bottom along with velcro on rubber foam on 3m painters tape which should remove with minimal residue if not required, as pictured.

 

Price includes UK Royal Mail 48 postage, if you want it shipping by another method please ask.

 

Full Specs - " Basically a great preamp with D.I. for passive passive basses "

The Sadowsky SBP-1 Bass Preamp offers bassists the same electronics that has been built into every Sadowsky bass for over 30 years. With the flexible combination of preamp and DI box, the pedal can be used in the effects setup in front of the amplifier or to connect your bass directly to a mixer or the PA or your amplifier. The control options are kept simple with Volume, Treble and Bass, Treble and Bass only work as a boost. The SBP-1 Bass Preamp is ideal for upgrading old vintage instruments where you don’t want to change the original electronics. The best results are achieved with passive basses or circuits with active pickups, where you can bypass the active electronics.

Bass preamp / EQ / DI effects pedal

Offers the same quality Sadowsky electronics that are built into Sadowsky basses

Boost only EQ section for Bass and Treble

Switchable mute for the instrument

DI output to connect the pedal directly into a PA or recording console

Bass + 18 dB boost at 40 Hz

Treble + 18 dB boost at 4 kHz

True bypass

Controls for Volume, Treble, Bass

Ground Lift switch

Bypass footswitch (On / Off)

Mute footswitch

Status LEDs

Metal housing

6.3 mm mono in / output jacks

6.3 mm mono tuner output

XLR out (DI)

Power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center

Current draw 11 mA

Dimensions (L x W x H) 106 x 107 x 61 mm / 4.17″ x 4.21″ x 2.4″

Weight ca. 780 g / 1.72 lbs

SDP-1a.jpg

SDP-1b.jpg

SDP-1c.jpg

SDP-1d.jpg

Edited by Aidan63
Sale agreed awaiting payment
  • Like 2
  • Aidan63 changed the title to Sadowsky SBP-1 Bass Preamp / DI SOLD
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...