SR5N neck (22 fret, 43mm nut, to fit OG EB SR5) £480

[Kiwi]

I'm pleased to say that this month we will be working up a mould for the standard EB SR5 bass, with the 22 fret neck.  Measurements are to be confirmed but the same options will be available for this neck that are available for the other necks (below). 

 

Necks come with: 
PEEK fingerboard with MOP side dots, Luminay side dots are available for £10 upcharge.  Rosewood, ebony and wenge fingerboards are available for a £75 upcharge.  Fretless (lined or unlined) is a £30 upcharge.

Fingerboard inlays: MOP or abalone dots are standard, MOP blocks are a £30 upcharge.  Abalone blocks are also available but slightly smaller than jazz blocks.  Other options - please talk to me.
TUSQ nuts installed but not slotted (slotting requires a string gauge to be assumed)
21 stainless steel frets (levelled to a straight neck)
Double action truss rods (heel capstan wheel style adjustment)

M4x40 neck bolts and inserts will be supplied.  (NB the necks don't come pre-drilled because neck bolt locations vary from bass to bass, the inserts must be used)
Tuner holes are drilled ( TBC) but screw holes for tuners are not (again, because different tuner designs have different hole locations)

 

NB: Dimensions are consistent with SR5 necks but are not Ernie Ball Music Man licensed products or in anyway associated with Ernie Ball Inc. obviously. There may be fractions of a millimetre difference due to manufacturing tolerances, we recommend having an experienced luthier fit the neck for the best possible fit. All rights to trademarks belong to their respective owners etc.  Specifications subject to change without notice due to continual, ongoing improvements.