ash Posted May 23 Posted May 23 (edited) Fender Mustang PJ MIM A feeler and please remove if it’s in the wrong section or if spares/repairs isn’t acceptable. I’m selling this as a spares project although it is functional albeit not pretty. I bought it earlier this year. It looked water damaged and an absolute mess. I bought it for the body and hardware and pickup parts, the plan being to strip it and buy a new neck for it. The neck had a lot of lacquer cracks and splits around the trussrod veneer at the back and headstock fascia. It needed some rewiring and a new tone pot and all the hardware cleaning with a wire brush. The finish was lifting in lots of places but there were no obvious cracks in the body - I thought about stripping it and finishing it with Tru-oil but haven’t got round to it. When it arrived I thought it wasn’t as bad as I had expected so I cleaned it up. Did the work on the pots,etc. the pickups were fine. I watched a video of rescuing a neck in similar condition and had a bash using epoxy resin. So I tried that and clamped it for a few days and gave it a light sanding to make it feel smooth under the hand. I’m no luthier, I just did it for as an experiment for fun. To my surprise the neck was okay to play and the trussrod worked and adjusted as it ought to. I have actually rehearsed and gigged with it as a spare for my old Fender Musicmaster. The headstock fascia and back has lots of hairline splits in it that I filled with titebond and clamped. They’ve been fine but again I wouldn’t really trust it as a main gigging bass. I must emphasise it’s probably best described as a Fender Mustang body (genuinely Roadworn bass) with a free neck. It’s a fun beater as is or you could put some more work into it to make it into a nice project. You could put another neck on it (I had bought a Bronco neck that unfortunately didn’t materialise thanks to a dodgy courier). The parts are all pretty decent after cleaning. It weighs around 3.7kgs. Here are pics, I can post more if there is interest. The last pictures are when I got it. God knows what had happened to the poor thing! No trades I can post in the UK. Edited 14 hours ago by ash Sold 3
Recommended Posts