Jump to content
Why become a member? ×

Fender Mustang PJ MIM Spares Project Bass
£185
Lancaster


Recommended Posts

Posted (edited)

Fender Mustang PJ MIM

 

A feeler and please remove if it’s in the wrong section or if spares/repairs isn’t acceptable. 

 

I’m selling this as a spares project although it is functional albeit not pretty. I bought it earlier this year. It  looked water damaged and an absolute mess. I bought it for the body and hardware and pickup parts, the plan being to strip it and buy a new neck for it. The neck had a lot of lacquer cracks and splits around the trussrod veneer at the back and headstock fascia. It needed some rewiring and a new tone pot and all the hardware cleaning with a wire brush. The finish was lifting in lots of places but there were no obvious cracks in the body - I thought about stripping it and finishing it with Tru-oil but haven’t got round to it. 

When it arrived I thought it wasn’t as bad as I had expected so I cleaned it up. Did the work on the pots,etc. the pickups were fine. I watched a video of rescuing a neck in similar condition and had a bash using epoxy resin. So I tried that and clamped it for a few days and gave it a light sanding to make it feel smooth under the hand. I’m no luthier, I just did it for as an experiment for fun. To my surprise the neck was okay to play and the trussrod worked and adjusted as it ought to. I have actually rehearsed and gigged with it as a spare for my old Fender Musicmaster. The headstock fascia and back has lots of hairline splits in it that I filled with titebond and clamped. They’ve been fine but again I wouldn’t really trust it as a main gigging bass. 

I must emphasise it’s probably best described as a Fender Mustang body (genuinely Roadworn bass) with a free neck. It’s a fun beater as is or you could put some more work into it to make it into a nice project. You could put another neck on it (I had bought a Bronco neck that unfortunately didn’t materialise thanks to a dodgy courier). The parts are all pretty decent after cleaning.

It weighs around 3.7kgs.

Here are pics, I can post more if there is interest. The last pictures are when I got it. God knows what had happened to the poor thing! 

No trades I can post in the UK for around £20.

IMG_9918.jpeg

IMG_9919.jpeg

IMG_9915.jpeg

IMG_9913.jpeg

IMG_9914.jpeg

IMG_9917.jpeg

IMG_9893.jpeg

IMG_9886.jpeg

IMG_9904.png

Edited by ash

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...