Dan_Nailed Posted May 23, 2009 Share Posted May 23, 2009 Says it all really, I'm interested in swapping my coil-tappable 40TW for a 40DC. I never use the single coil mode, and I really like the 40DC sound in my Euro so I'd like to have one in my US Spector in the bridge. The 40TW uses Ceramic & Steel magnets so it's a little warmer sounding than a DC, and basically when it's in humbucker it's a 40CS, and in single coil it's a 40 J or EMG-J, which are almost identical. It can be used for either neck or bridge. I propose a straight swap including the quik-connect leads and volume pot, I have a push pull pot so will send you the pickup, connector and pot to drop straight in the bass. The quick connect is 6-conductor on the TW for both coils while the 40DC is 3 conductor. The TW cost's about a tenner more so you're technically making a profit haha! My pickup is in great condition although the red EMG logo has started to wear, as most EMG logos do, but other than that it's factory-new. PM on here or email [email protected] Cheers, Dan Link to comment Share on other sites More sharing options...
Dan_Nailed Posted May 28, 2009 Author Share Posted May 28, 2009 King Tut and I are currently in the process of trading! Link to comment Share on other sites More sharing options...
Recommended Posts