Embra Posted May 9 Share Posted May 9 (edited) Broughton Always On High Pass Filter (https://www.broughtonaudio.com/product-page/always-on-high-pass-filter) £80 postage to UK included A standard Broughton high pass filter with the bypass switch removed. This design allows a more compact layout, fitting on a single pedal board rail, or even mountable underneath a pedal board. The high pass filter is a 12 dB per octave low frequency filter. The knob controls the cutoff frequency and ranges continuously from 25 Hz to 190 Hz. It has the same frequency points as the switched version, but it does not have the frequencies printed around the knob. The stock input impedance is 1MΩ. If you have an acoustic pickup that requires a specialized input impedance, write it in the notes during check-out, and we will accomodate the request at no extra cost. The output impedance is 100Ω. This device will work with active or passive instruments, as well as with other devices such as pedals, preamps, or effects loops. The High Pass Filter requires a DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. It can accept 9 to 24 volts. Higher voltages will provide more clean headroom. The current draw is approximately 10 mA. Dimensions: 3.64" wide x 1.75" long x 1.06" tall Broughton Audio Messenger Jr preamp, eq, HPF, LPF and DI (withdrawn) Edited August 19 by Embra price drop 6 Quote Link to comment Share on other sites More sharing options...
hemdee666 Posted May 10 Share Posted May 10 Hi, pm’d you. Grtz, Marc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.