Grezza 1 Posted January 31 Share Posted January 31 (edited) Ashdown RootMaster Evo 500 - £349 -( Forum issues at present) Recently serviced at Ashdown's workshop. I’ve owned this for a few years now but it has only ever been used for rehearsals since I’ve had it. Only selling as I’m moving on to using a MarkBass setup and need the funds to expand this (hence the trade options) can ship uk at buyer’s expense and risk. Matching RM210T and 115T also available and would make a deal price for the complete rig THE OFFICIAL BLURB The Rootmaster EVO series’ pre amp now includes a passive and active input jack socket for use with high and low output instruments, this sets a clear signal path to the input control enabling you to fine tune your input level using the trademark Ashdown VU meter. With the signal at its optimal level, you then hit the rich features designed enhance your tone, such as the shape button, 5-band EQ and on-board compressor. The drive control, as always delivers a delectable valve emulated over-drive, whilst the sub harmonic controls add further fatness to your tone - both can be foot-switched via an FS 2 footswitch (sold separately). Rootmaster EVO heads also feature an upgraded power section plus a handy mute button. What’s even cooler is when switched to mute, the trademark Ashdown Engineering VU meter changes from orange to cool blue – creating the perfect on stage mood lighting between sets. Specifications Power Output500 Watts Power Requirement115-230 Volts Speaker Outputs2 x Speakon outputs Frequency Response-3dB @ 17Hz und 30KHz High Instrument InputImpedance 3.9m Ohms, input range 150mV Low Instrument InputImpedance 10k Ohms, input range 300mV - 40V p-p Line InputImpedance 22k Ohms, input level 0dBu nominal DI Output600 Ohm balanced, Level 0dBu nominal Tuner OutputImpedance 22k Ohms, Level 0dBu nominal ImpedanceMinimum 4 Ohms Signal to noiseBetter than 80dB (EQ flat) EQBass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep + Effects SendImpedance 22k Ohm, Level 0dBu nominal Effects ReturnImpedance 22k Ohms, Input Level 0dBu Nominal DistortionLess than 0.5% THD H x W x D (mm)86 x 314 x 235 Weight (kg)5 Edited February 12 by Grezza 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts