biro Posted August 8, 2022 Share Posted August 8, 2022 (edited) Hi all, Selling this, which I bought here. Fantastic pedal, and personally, I think it's an improvement over the original Microtubes concept as the crossover works very well on bass. However, as it turns out, I prefer doing things "in the box" using my laptop. Moreover, my partner keeps finding pedals under my desk, and at some point will realise it's not always the same three... Comes with original box and booklet. Blurb below. The Microtubes X series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have. High-pass frequency: Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition. Low-pass frequency: Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids. Level: Sets the overall output volume of the unit. Drive: Sets the amount of distortion for the high pass side. Mix: Sets the blend between low-pass and high-pass signals. Mids: Active mid control placed after the Mix control. +-12dB @ 500Hz. Edited August 14, 2022 by biro 1 Link to comment Share on other sites More sharing options...
mrn1989 Posted August 8, 2022 Share Posted August 8, 2022 If mine sells, I'll take this 1 Link to comment Share on other sites More sharing options...
Recommended Posts