dodgnofski Posted May 2, 2016 Share Posted May 2, 2016 (edited) Tiny footprint, huge sound - few small marks - see pics - everything working as it should & actually DOES fit it the accessory pocket of my Bass Guitar Gig bag 140w at 8 ohms / 200w at 4 ohms. Contour switch, aux. In / headphones out and does not need to be connected to a cab to use - so fab for practising, combined Speakon / 1/4" Speaker Jack, Line out with Pre/ Post EQ switch. - 10db switch for active basses + whisper quiet variable speed cooling fan - let's face it - it's the Tardis of Bass Amps !! Here are the Tech - specs we all love:- -10dB padInput ImpedanceDirect Output ImpedanceAux-In Input ImpedanceEqualizer:BassLo-MidHi-MidTrebleVoicing Filters:ContourNoise: -90 dB reference to 200W/140W, "A" Weighted.Amplifier Protection:Full short circuit, thermal and RF protection.Stable into reactive and mismatch loads.Five second muted warm-up.Cooling:Variable speed SPECS140W @ 8 Ohms,200W @ 4 Ohms.0.6V Rms1.6V Rms1M Ohms500 Ohms100K Ohms+/-10dB @ 60Hz+6dB/-10dB @ 250Hz+6dB/-10dB @ 1KHz+/-14dB @ 7KHz+2dB @ 50Hz/ -10dB @ 500Hz/+3dB @ 7 KHzOwners ManualPart # 160-0630-A2MB 2004 BANDEQAMPAMPDimensions:Height: 2.50" [63.50mm] ( With Rubber Feet)1.75" [44.45mm] ( Without Rubber Feet)Width:7.75" [196.85mm]Depth:8.00" [203.20mm]Weight:Power requirements:MB20010AUX INHEADPHONES12LINEOUT2.00 lbs. [0.91 Kg]U.S.A/Canada 120V/60Hz.240W(full power), 48.6W (average power)Europe 230V/50Hz/60Hz240W(full power), 48.6W(average power)Japan 100V/50Hz240W(full power), 48.6W(average power)DIRECTOUTPREPOST+ Legendary GK EQ section and can go quite loud at 4 ohms, especially through efficient cabs. Rehearsed with a seven piece band including keys, brass plus 'animal' on drums and was asked to 'turn down a tad' - but that could be down to my rubbish playing of course !! Can post to the UK Mainland - next day Special Delivery will be £11.00 - fully insured Please excuse the rubbish photography and thank you for your time and interest 👍🏻 Edited May 3, 2016 by dodgnofski Link to comment Share on other sites More sharing options...
dodgnofski Posted May 2, 2016 Author Share Posted May 2, 2016 (edited) On hold for a day or two Edited May 2, 2016 by dodgnofski Link to comment Share on other sites More sharing options...
Recommended Posts