SOLD - SOLD - SWR MM Preamp, QSC Power Amp- SOLD - SOLD £950

[JPJ]

For Sale only - No trades thanks

I recently assembled this rig comprising of an SWR Marcus Miller Preamp coupled to a QSC PLX1602 power amp giving a massive 1600w bridge mono into a 4 ohm load. I intended replacing my SWR SM1500 with this rig, but having had a chance to A/B the two rigs on a couple of gigs I've decided to stick with the SM1500 and I can't afford to have two pro level rigs sitting around.

The preamp offers two inputs switchable from the front panel, with pad, mute, gain, and SWR's aural enhancer circuit. The tone controls comprise a tone stack defeat switch, bass, low mid, mid, high mid, and high tone controls with the low, mid and high mid being semi-parametric on dual concentric pots. The preamp also includes a fully adjustable compressor featuring threshold, ratio, attack and release controls along with a switch to defeat the compressor and another to place the compressor either before or after the EQ section. Front panel controls are completed by an effects blend control for the foot switchable effects loop, and a solo boost and bass intensifier circuit both of which are again foot switchable. On the back panel, there is a preamp out on both XLR and jack sockets with ground lift switch, a DI out again on both XLR and jack sockets, along with a ground lift switch, a 180 degree phase switch, a DI level control, and a switch giving either direct, post compression or post compression/eq DI signal. The back panel is completed with jack sockets for the supplied four button foot switch, a tuner out, a parallel input, and the effects loop send and return. There is a great series of youtube videos of Marcus Miller demonstrating the features of this preamp

Not too much to say about the power amp other than it is a professional power amp. There are dip switches on the back panel allowing you to configure how the amp functions including paralleled inputs, stereo or bridge mono, a low pass filter on/off along with a switch to select either 30 or 50Hz for the filter. Inputs are on XLR's and jacks and outputs are on Speakon's or binding posts. Oh and its loud and its powerful.

I will include the original four button foot switch and original SWR foot switch cable, the short XLR cable linking the preamp to the power amp, the two mains leads and a four pole speakon cable to access the bridge mono mode of the power amp, along with a photocopy of the SWR manual and the original QSC manual.

I would prefer to sell as a complete rig rather than separate. Racked up in the included Boschma flight case (almost brand new) the rig weighs about 22kg so again, I'd prefer collection from just north of Newcastle upon Tyne but I am willing to ship at the buyers risk and expense. I will also include the original four button foot switch and original SWR foot switch cable, the short XLR cable linking the preamp to the power amp, the two mains leads and a four pole speakon cable to access the bridge mono mode of the power amp.

I also have this advertised locally. Any questions please ask.

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1163_zps0794f760.jpg.html"][/url]

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1164_zpsdd3cddcc.jpg.html"][/url]

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1165_zps8deb2771.jpg.html"][/url]

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1166_zps004d8ddc.jpg.html"][/url]

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1168_zps008ea348.jpg.html"][/url]

[url="http://smg.photobucket.com/user/JPJ/media/IMG_1167_zps63fef6cf.jpg.html"][/url]

Edited August 31, 2014 by JPJ

[JPJ]

Bump

[jsixties]

Awesome rig you have there Kev!

As stated through PM, please count with me for the MM preamp if you finally decide to split the sale.

Good luck!

[JPJ]

Now sold, thanks for all the interest