Greggo Posted February 4, 2014 Author Share Posted February 4, 2014 [quote name='Grangur' timestamp='1391508387' post='2357816'] You can get it at Homebase, in the decorating section with the sandpaper. [/quote] Not at my crappy homebase near me unfortunately. Quote Link to comment Share on other sites More sharing options...
Greggo Posted February 6, 2014 Author Share Posted February 6, 2014 Managed to get a grey Scotch Brite ultrafine pad from a car shop, which I beleive is equivalent to around 800 grit, so will give this a rub over tonight. Quote Link to comment Share on other sites More sharing options...
Greggo Posted February 6, 2014 Author Share Posted February 6, 2014 Update - rubbed neck down with Scotch brite pad and this has achieved desired result of a smooth matte finish that has taken away the stickiness that was present before. Any coursing done by lower grade paper doesn't really seem noticeable anymore so it wasn't scratched like I first feared Quote Link to comment Share on other sites More sharing options...
hamfist Posted February 7, 2014 Share Posted February 7, 2014 Excellent ! result ! Quote Link to comment Share on other sites More sharing options...
Grangur Posted February 7, 2014 Share Posted February 7, 2014 [quote name='hamfist' timestamp='1391760934' post='2360922'] Excellent ! result ! [/quote] Agreed! Perfect ending Quote Link to comment Share on other sites More sharing options...
Greggo Posted February 7, 2014 Author Share Posted February 7, 2014 Thanks for all help. I need to stop myself from using the Scotch brite pad on a gloss neck on my squier classic vibe tele six string. It probably would benefit from a quicker satined neck but it's such a pretty neck I don't want to spoil the look of it! Quote Link to comment Share on other sites More sharing options...
Guest Posted February 7, 2014 Share Posted February 7, 2014 I always sand the poly necks on my Basses. I use the stuff called "FreeCut" that car body shops use, It's not the same as ordinary sand paper, it has a different type of grit and it doesn't clog so no need for wet and dry. 800 grit to start then some fine wire wool to finish, it takes about 20 minutes tops to get perfect results. Personally I wouldn't use a block to sand a neck either but each to their own. A piece of masking tape at the heel and the pointy end so you get nice tidy lines when it's done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.