AKAK Posted January 18, 2014 Share Posted January 18, 2014 I just purchased this amazing box the other day but I am having a slight problems and was wondering if someone could shed light on this problem. I have the following signal chain, Bass > Midi Murf > Apogee Jam > Logic Pro The problem is that when the MuRF is on and the Mix is turned all the way clockwise the volume drops remarkably to almost inaudible. When the dry signal is mixed in the sound increases the more anti clockwise i turn (both the output and the drive I have also tried at max but with minor improvement in overall volume). Is there something I am missing on the Murf or in Logic(lol)? as a volume output drop this noticeable makes the effect totally inaudible when mixed into a track. Feedback appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
Wud Posted January 18, 2014 Share Posted January 18, 2014 Hmm, All the Foogers have a HUGE dynamic range, and are happy handling anything from a Low Impedance Guitar/Bass PickUp, all the way up to Line Level and beyond. Maybe double check your cables ? Quote Link to comment Share on other sites More sharing options...
AKAK Posted January 21, 2014 Author Share Posted January 21, 2014 (edited) Thanks Wud! Problem exists 'before' Bass and MoogerFooger LOL! It wasn't the cable but I had different expectations of what this pedal was about. I am now caught in two minds whether to keep it until I get my amp or to shift it hmmm. Its such a remarkable beautiful pedal/effect/box/artwork though! Edited January 21, 2014 by AKAK Quote Link to comment Share on other sites More sharing options...
xgsjx Posted January 22, 2014 Share Posted January 22, 2014 Have you tried adjusting the drive & output dials & have you checked that the patterns are playing/sliders not pulled right down? Quote Link to comment Share on other sites More sharing options...
AKAK Posted January 22, 2014 Author Share Posted January 22, 2014 I had the sliders set for the staircase sound on the manual hence some were down and some up. I think I was over hasty to appreciate that I was cancelling some frequencies out hence the volume output would be affected. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.