Wild Switching Method (1P2T or 2P2T)

[AngelLaHash]

Get a Pot (Dual or Single)
Take it apart
Paint over the OUTER Track with Conductive Paint
Cut the Track in the middle with a thin hair line crack (making sure each side isnt connection any more)
and put it all back to gether,

Making a 1P2T Switch,
Left and Right lugs one say the outputs and the Common the middle lug is the Common.

Would this stop you POPING sound that you get from a, Spring loaded switch (may not have a SPRING so to speak but a way of flipping from one connector to another)


And if you want a 2P2T you would need to have a Dual Pot and do the same to each plate.

[paul_5]

If an effect is popping when you switch it on it may be a case of increasing the input capacitor value to eliminate it.

I like your idea though!