AngelLaHash Posted May 2, 2013 Share Posted May 2, 2013 Another one of my suggestions becatuse Ive been trying to read up on all the different types of Bleeds that people like and wanting to HAVE THEM ALL I put a Switch on the Jack Socket, and change the socket for a Stereo Socket The Switch is a 1P2T ultra MINI Toggle its wired in to the Middle ring of a Stereo Socket with one side of the Switch wired to Earth and the other side wired to Pre Volume As a Bleed is normally between Pre Volume and the Volume output I also can make a Filter, as i had earth too I had brought some chunky looking jack sockets, and figured i could fit a Small Cap and Resisters in that and wired it in to the Jack Plug itself and the other side to a Mono Quote Link to comment Share on other sites More sharing options...
louisthebass Posted May 2, 2013 Share Posted May 2, 2013 [quote name='AngelLaHash' timestamp='1367455555' post='2066001'] Another one of my suggestions becatuse Ive been trying to read up on all the different types of Bleeds that people like and wanting to HAVE THEM ALL I put a Switch on the Jack Socket, and change the socket for a Stereo Socket The Switch is a 1P2T ultra MINI Toggle its wired in to the Middle ring of a Stereo Socket with one side of the Switch wired to Earth and the other side wired to Pre Volume As a Bleed is normally between Pre Volume and the Volume output I also can make a Filter, as i had earth too I had brought some chunky looking jack sockets, and figured i could fit a Small Cap and Resisters in that and wired it in to the Jack Plug itself and the other side to a Mono [/quote] Possibly in the wrong forum? Quote Link to comment Share on other sites More sharing options...
AngelLaHash Posted May 2, 2013 Author Share Posted May 2, 2013 (edited) Theorys dosnt say what type of Guitars, and as many mix over I know that is a STRAT Jack, but can be used in other areas Baslic a Bleed is a Filter and even a Bass can use that Not seen many Bleeds for a Bass if any do bass players not play around with such a thing ----- Well just had a go with it and it Picks up the Sound a bit more I was trying it on a L&G Passive Tone Circuit So i had a 1P2T (On/Off/On) hooked up to a Stereo Socket One side is hooked up to the Pickup selector and the other just before it gets in to the Volume Pot Middle is it being Off ++I am pleased with it Personally++ Edited May 6, 2013 by AngelLaHash Quote Link to comment Share on other sites More sharing options...
AngelLaHash Posted May 10, 2013 Author Share Posted May 10, 2013 (edited) well was talking and i guess aint finished the debate with a Ozzy guy about bleeds [url="http://www.strat-talk.com/forum/tech-talk/228422-treb-bleed-values.html"]http://www.strat-tal...eed-values.html[/url] Before the WITCH Burning, Tech Dose Transfer over, this link is more about the SWITCHING than the Values of BLEED and the way it is Bleeding I have tried to look up Bleeds for a Bass to find some values. XXX Edited May 29, 2013 by AngelLaHash Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.