MODS PLEASE REMOVE AD Studiomaster 1200D rack power amp was £115 now £85! £125

[jhk]

[size=5][b][i]2u rack stereo power amp, (proper) 600watts per side or 1200 watts bridged @ 8ohms.[/i][/b][/size]

[size=5][b][i]in very good con[/i][/b][/size][size=5][b][i]dition.............. add much power to your regular bass head or bass pre-amp or use for bi-amping.... or even p.a ..............[/i][/b]goes perfectly matched with studiomaster crossover C180 (creates high and low frequencies for bi-amping) in my other ad..........[/size]
[size=5][b][i]no freight,export,courier etc........... collection only[/i][/b][/size]

Edited February 17, 2014 by jhk

[Ashwood1985]

Hiya,

What's the minimum ohmage per side and bridged?

Thanks,

Ash

[jhk]

[size=5][b][i]as far as I know it`s 8 ohms but i`ve never used that facility............................[/i][/b][/size]

[Ian Savage]

Officially, four ohms a side will pull 600W per channel, and it'll supply 1200W bridged into 8 ohms. It WILL go lower but will run hot and shorten the life of it. If you need more than 600W into a four-ohm cab though, you're using the wrong cabs

[jhk]

[quote name='Ian Savage' timestamp='1367269333' post='2063592']
Officially, four ohms a side will pull 600W per channel, and it'll supply 1200W bridged into 8 ohms. It WILL go lower but will run hot and shorten the life of it. If you need more than 600W into a four-ohm cab though, you're using the wrong cabs
[/quote]

thank you sir......................

[jhk]

[b][i]Final[/i][/b] [i][b]reduction bump![/b][/i]

[jhk]

bump