Sold, please remove

[HazBeen]

I just stumbled upon a very very well priced Power Amp that I have been after for a while. This means that I may let my QSC PLX1804 go. Bought not very long ago (about a year) from Thomann for around GBP700,-. Has probably seen around 30 gigs, no more and has been rack mounted all the time.

SPECIFICATIONS [b]PLX1804[/b] [b]Stereo Mode
8 ohms (each channel) [/b]*
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD

550 W
600 W [b][b]Stereo Mode [/b]
4 ohms[/b] [b](each channel) [/b]*
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD

800 W
900 W Signal to Noise (20 Hz - 20 kHz) -106 dB Input Sensitivity @ 8 ohms 1.20 Vrms Gain @ 8 ohms 35 dB Output Circuitry 2-Tier Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz
Less than 0.02%
Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 200 Input Impedance 20k ohms balanced
10k ohms unbalanced Input Clipping 5.5 Vrms (+15 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon®
(Both channels available on Ch 1 output) Rear Panel Switches Circuit Breaker Front Panel Controls Detented Gain Attenuator: 0 to ∞ dB
Power On/Off Front Panel Indicators Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED [b]PROTECTION[/b]
Amplifier Protection Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads Load Protection On/off muting, DC-fault power supply shutdown Infrasonic -3 dB, 6 Hz DC fault Power supply shutdown Ultrasonic -3 dB, 80 kHz Short Circuit Muting Thermal Limiting at 85° C, Muting at 90° C Over Current Active clip limiting
AC circuit breaker High Line Standard +15%, survive +25% Low Line -40% [b]PHYSICAL[/b] Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
8.95" (22.7 cm)
11" (27.9 cm) Weight 13 lbs. (5.9 kg) net
18 lbs. (8.2 kg) shipping Agency Approvals CE, FCC, cUL, UL
[color=#000000][font=Arial, Helvetica, sans-serif][size=3]* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits[/size][/font][/color]

CURRENT CONSUMPTION [b]PLX1804[/b] 1/8 Power (pink noise) 8 ohms
4 ohms 5.7A/120V
9.4A / 120V 1/3 Power (pink noise) 8 ohms
4 ohms 10.4A/120V
16.5A / 120V Full Power 8 ohms
4 ohms 20A/120V
32A / 120V Notes Long term, breaker-limited to 15A/120V

Pretty awesome power amp for bass and many other applications.

Looking for GBP400 + shipping

Edited May 1, 2012 by HazBeen